3. Press one of the DISC buttons (1 to 3).
The MD and track numbers start flashing.
DISC 1 DISC 2 DISC 3
MD Track Step number number number
3 | 3 |
CD | MD |
2 | 2 |
1 | 1 |
PROGRAM
MD
CD
15
❏If the MD and track numbers stop flashing, press the DISC button (1 to 3) again.
4.Press the number buttons to select the tracks.
❏Example: For track 5, press 5. For track 15, press +10 then 5. For track 20, press +10 then 10. For track 32, press +10 three times, then 2.
The MD and track numbers stop flashing, and the step number is displayed.
3 | 3 | |
CD | MD | |
2 | ||
2 | ||
1 | 1 |
PROGRAM
MD
CD
15
5. Repeat steps 3 and 4 to select other tracks for the program.
6. Press the £button.
The unit plays the tracks in the order you have programed them.
❏If you try to program a 33rd step, “MD FULL” will appear on the display.
❏If you try to program a track from an empty loading slot, or a track number that does not exist on the MD (for example, selecting track 14 on an MD that only has 12 tracks), such entries are ignored.
❏You can skip to a particular program step during Program Play. Rotate the MULTI JOG dial clockwise or counterclockwise on the unit, or press the 4 or ¢ buttons on the Remote Control.
❏To play the Program Play repeatedly, press the REPEAT button. For details, see “Repeating a Selection or MDs” on page 31.
To stop playing, press the 7button.
To exit Program Mode, press the PLAY MODE button twice to change to Continuous Play mode while the MD Recorder is stopped.
Checking the Program
While the MD Recorder is stopped, use the 4or ¢ buttons on the Remote Control to check the contents of the program.
Each time you press the ¢button, the program contents are shown on the display in the pro- gramed order. Pressing the 4 button displays the programed steps in the reverse order.
Changing the Program
Only possible while the MD recorder is stopped.
To delete a program, press the CANCEL button on the unit. Each time you press the button, the last step is erased.
If you open the loading slot cover, the program is erased.
To add a track to the program, follow the procedure above (on either the unit or the Remote Control). The new tracks are added to the end of the program.
30
