Using the Cassette Deck (Recording)
DOLBY B NR |
| |
| DOLBY B NR | |
REC PAUSE | REC PAUSE CD REC | |
AUTO REVERSE | ||
CD REC | ||
AUTO TAPE SELECTOR |
ÛÜ(Play)
7(Stop)
PHONES
DOLBY B NR
IMPORTANT: Before using the Remote Control for the tape operations, set the Remote Control to the tape operation mode by pressing the TAPE button.
Things to Know Before You Start Recording
❏It should be noted that it may be unlawful to
❏Press the DOLBY B NR button — the indicator lights up — to reduce tape hiss.
❏When you want to record onto both sides of a tape, turn on the auto reverse mode. However, recording automatically stops after recording in the Ûdirection with the auto reverse mode on. Therefore, make sure that the tape direction is Üwhen recording with the auto reverse mode on.
❏The recording level is automatically set correctly, so it is not affected by the VOLUME control. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level.
❏Two small tabs on the cassette tape, one for side A and
one for side B, can be removed to prevent accidental erasure or
❏When recording, you can hear Sound Modes through the speakers or headphones. However, the sound is recorded without Sound Modes (see page 9).
❏Type I and Type II tapes can be used for recording.
Note: The first and end portions of the tape are called leader tape, which cannot be recorded onto. When you start recording, the first part of the recording may not be done because of this leader tape. Before inserting the cassette, first wind the leader tape.
CAUTION: If recordings you have made have excessive noise or static, the unit may be too close to a TV which has been on during recording. Either turn off the TV or increase the distance between the TV and the
54