CD Direct Recording
Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have set in a program. You can even record in Random Play. In this case, the tracks of the 3 CDs are recorded randomly on the tape.
1.
2.
3.
CD REC
Prepare CDs. (See page 19.)
Check that the CD Player is not playing a CD.
Insert a blank or erasable cassette in the cassette holder.
❏When you want to record on both sides of a tape, press the 
button to turn on the auto reverse mode. In this case, press the Übutton then the 7button to start recording in the forward (Ü) direction.
Press the CD REC button.
“CD → TAPE” appears on the display then the unit plays the CD and starts recording.
At the end of the tape, the
When the recording is finished, the CD Player and Cassette Deck stop.
Fade out
Front side | 1 |
| 2 |
| 3 |
| 4 |
| 5 |
Reverse side | 9 |
|
|
|
|
|
|
|
|
| 8 |
| 7 |
| 6 |
| 5 | ||
|
|
|
| ||||||
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fade out | 10 sec. blank |
To stop recording, press the 7button on the Cassette Deck or CD Player (or the 7 button on the Remote Control).
Notes:
•When recording from a CD program (or random play) made from more than one CD, the tape will pause when the unit switches to another CD. Then, when the CD is ready, the unit releases the pause and continue the recording.
•When making Sleep Timer setting while doing CD Direct recording, set the time so that there is enough leeway to finish the recording before the power goes off. If the time is set to about the length of the CD, the power may go off before recording finishes.
•For CD Direct Recording using more than one CD, use a blank tape. If you use a prerecorded tape, prerecorded sound may not be erased between
56
