JVC LET0070-002A manual Presetting Stations, Selecting a Radio Station, Using the unit

MULTI JOG

	PTY	DISPLAY
EON ON/OFF	SEARCH	MODE

1	2	3
TA/NEWS/	PTY SELECT
INFO

4 5 6

7 8 9

10 +10

Selecting a Radio Station —————————————————————

❏Press the or button on the unit repeatedly.

The frequency changes in one step increments. “TUNED” appears on the display when a station is tuned in.

❏Press and hold the or button for a few seconds, the frequency changes continuously until a station is tuned in. “TUNED” appears on the display.

❏Possible only after presetting stations (For presetting methods, see “Presetting Stations” below).

Using the unit

Select a preset channel by rotating the MULTI JOG dial clockwise or counterclockwise.

Using the Remote Control

1.Press the TUNER button so that you can receive the most recent station tuned in.

2.Press the number button for the preset station you want.

❏Example: For channel 5, press 5. For channel 15, press +10 then 5. For channel 20, press +10, then 10. For channel 30, press +10 two times, then 10.

Presetting Stations

TUNER

SET

You can store up to 30 stations (FM and AM (MW/LW)).

To do the following procedure, use the buttons on the unit.

Note: In some cases, test frequencies have been already memorized for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method.

1. Tune to a station you want to preset (see “Tuning in a Station” on page 11).

2. Press the SET button.

On the display, “– –” (preset number position) will flash for 5 seconds.

❏During these 5 seconds while the indication on the display is flashing, you can assign a channel number to the station and enter it into the memory.

3. 4.

3															3
CD																MD
																2
2
1																1
STEREO TUNED																EON
																TA NEWS INFO
MD																SLEEP
CD																DAILY
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	REC 1 2 3

Rotate the MULTI JOG dial clockwise or counterclockwise to select a preset number.

Press the SET button again.

“MEMORY” appears on the display and the selected station will be preset in the channel number you have specified.

MULTI JOG

SET

3															3
CD																MD
																2
2
1																1
STEREO TUNED																EON
																TA NEWS INFO
MD																SLEEP
CD																DAILY
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	REC 1 2 3

❏If a station has been previously stored in the same channel number, it will be erased and the newly selected station will be stored.

5.Repeat steps 1 to 4 for each station you want to store in memory using different preset numbers.

CAUTION: If the unit is unplugged or if a power failure occurs, the preset stations will be erased in a few days. If this happens, preset the station again.

12