Standard Recording
You can record any sound source on the tape.
❏You can also record the same source on the MD at the same time. (See page 34.)
Using the unit only
1. Insert a blank or erasable tape into cassette holder.
2. Press the button if you want to record on both sides of the tape.
The indicator above the button lights up.
❏When using the auto reverse mode, press the Ü button then the 7button to start recording in the forward (Ü) direction.
3.Prepare the source, for example, by tuning in a radio station, loading CDs or MDs, or turning on the external component.
| 4. Press the REC PAUSE button. |
REC PAUSE | The indicator above the button lights up and the |
5. Press the Ü(or Û) button to record the front side (or the reverse side).
❏ When using the auto reverse mode to record both sides of a tape, press the Ü button to begin the recording from the front side.
To pause, press the REC PAUSE button. Then press either the Ûor Ü button to restart recording. To stop recording, press the 7 button.
To remove the tape, press down the 0button after stopping the play.
If you are recording an AM (MW/LW) broadcast and you hear | 1 |
| ||
interference, move the BEAT CUT switch on the back panel from |
| |||
BEAT |
|
| ||
|
| |||
|
| |||
position 1 (the normal mode) to position 2. |
|
| ||
|
| |||
CUT | ||||
| ||||
| 2 |
| ||
|
|
|
|
55