Music Scan
To find the beginning of a music track during play, use the Music Scan function. Music Scan searches for blank portions that usually separate selections, then plays the next selection.
Finding the Beginning of the Current Selection
Press the 1or Á button during play.
❏Make sure that you press the 1 or Ábutton in the opposite direction to that in which the
tape is playing. Searching stops at the beginning of the current selection, and the current selection starts automatically.
Finding the Beginning of the Next Selection
Press the 1or Á button during play.
❏ Make sure that you press the 1 or Ábutton in the same direction as that in which the tape is playing. Searching stops at the beginning of the next selection, and the next selection starts automatically.
Music Scan works by detecting a
not work well if your tape has...
•No blank at the beginning of a selection.
•Noise (often caused by much use or poor quality dubbing) which fills the blank.
•Long, very soft passages or pauses in a selection. The scan will detect these as
Other Useful Features of the Cassette Deck
❏ Use the auto reverse mode to make the tape automatically reverse at the end of a side and start playing the other side.
Each time you press the 
button, the auto reverse mode turns on (the indicator lights up) and off (the indicator goes off).
DOLBY B NR | ❏ Press the DOLBY B NR button to switch Dolby B NR* on (the indicator lights up) or off (the | |
indicator goes off). | ||
| ||
| If a tape is recorded with the Dolby B NR system, playing it back with the Dolby B NR on will | |
| reduce tape noise and improve the clarity of the sound. |
*Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
“DOLBY” and the
53
