JVC LET0070-002A manual One Touch CD Recording CD REC, Changing the Display Mode

One Touch CD Recording (CD REC)

The CD REC function allows you to easily record CDs on the MD1.

CD REC

1.

2.

3.

Prepare CDs and a recordable MD into the MD1 loading slot.

❏You can load the CDs on any CD trays, but always load the recordable MD into the MD1 loading slot. If not, this function does not work.

Be sure that the CD you want to start recording from is selected as the playing source.

❏If not, select it by pressing the corresponding CD button (1 to 3), then the 7 button.

Press the CD REC button on the MD Recorder.

The indicator next to the CD REC button lights up and the recording begins automatically. Recording will stop when the MD in the MD1 loading slot is fully recorded.

3															3
CD																MD
															2
2																\
1															1
CD
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16

3															3
CD															MD
															2
2
1															1
CD
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16

Remaining time of	Remaining time
the current track	of the MD

❏If you press the CD REC button while playing a CD, the recording starts from the beginning of the current track, and only the current track is recorded.

❏If you press the CD REC button after making a program, you can automatically record the program.

Changing the Display Mode —————————————————————

DISPLAY	You can check the CD track number and the MD track number while recording.
/CHARA	Press and hold the DISPLAY/CHARA on the unit. While holding the button, the following informa-
	tion appears on the display.

CD track number currently playing

3					3
CD					MD
2					2
1					1
MD
1	2	3	4	5	6

MD track number currently being recorded

/ To stop recording, press the 7 button.

36