EN 63
Information On J Terminal
J terminal
J Terminal [JLIP (Joint Level Interface Protocol) Connector]
The J terminal is used to connect the recorder to a personal computer or similar device to allow computerized control of the recorder during editing and certain other operations.
Examples:
With the optional JLIP VIDEO CAPTURE BOX
●Enables Random Assemble Editing of up to 99 segments, using this recorder as the source player.
●Allows you to capture still images from the recorder into a personal computer.
For further details consult your nearest JVC dealer.
JLIP ID Number
Your recorder has its own JLIP ID number. This ID number must be unique when your recorder is connected to another device via its J terminal. The ID number is preset to “1” at the factory. You can change this number to any number between “1” and “99”. If it is necessary to change the JLIP ID number, perform the following steps.
A Access the Main Menu screen.
Press MENU.
B Access the Initial Set screen.
Press rt to move the highlight bar (pointer) to “INITIAL SET”, then press OK or e.
C Access the JLIP ID No. Set screen.
Press rt to move the highlight bar (pointer) to “JLIP ID NO. SET”, then press OK or e.
D Set the JLIP ID number.
Press the number keys to enter the desired ID number, then press OK.
E Return to the normal screen.
Press MENU.
