![](/images/new-backgrounds/1280795/28079571x1.webp)
36 EN | TIMER RECORDING (cont.) |
Check, cancel and change programmes
A Disengage the timer mode.
Press # (TIMER), then press 1.
B Access the Programme Check screen/display.
Press ".
C Access the Programme screen/display.
Press " again to check more information. Each time you press ", the next programme’s information appears.
The front display panel shows the programme start time. Pressing OK changes the display to the programme stop time, then the date and the channel position.
To cancel or change a programme...
D Cancel or change a programme.
Press & to cancel a programme. To change programme settings, press the appropriate button:
●You can change “TV PROG” to “SAT” for the channel position by pressing the number key “0”.
E Return to the normal screen/display.
Press " as many times as necessary. If there are still some programmes remaining, go on to step 6.
F Return to the timer mode.
Press # (TIMER).
NOTE:
You can also check the programmes on the front display panel even if the recorder’s power is off (unless the recorder is in the Power Save mode pg. 70) or the recorder is in the Timer mode; however, it is not possible to cancel or change the programmes.