EDITING | EN 51 |
Edit From A
Camcorder
AIf the camcorder has no S-VIDEO output connector ...
Recorder
AUDIO | VIDEO | To rear panel |
PAUSE/R.A.EDIT | ||
input | input | connector |
| Video cable |
|
| (not provided) | |
| Audio cable (not provided) | |
| (not provided) | |
| AUDIO OUT | (JVC camcorder |
| only) | |
|
|
Camcorder
VIDEO OUT
EDIT
Player
BIf the camcorder has an
Recorder
AUDIO | To rear panel | |
PAUSE/R.A.EDIT | ||
input | input | connector |
You can use a camcorder as the source player and your recorder as the recording deck.
A Make connections.
AIf the camcorder has no
... connect the camcorder’s AUDIO OUT and VIDEO OUT connectors to the recorder’s front panel AUDIO and VIDEO input connectors.
BIf the camcorder has an
... connect the camcorder’s AUDIO OUT and
AUDIO and S-VIDEO input connectors.
●When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your recorder.
●When a Master Edit
B Set the recorder’s input mode.
Press AUX (number key “0”) and/or PR to select
C Set the edit mode.
See “PICTURE CONTROL” on page 69.
D Start the camcorder.
Engage the Play mode of the camcorder.
E Start the recorder.
Engage the Record mode of the recorder.
NOTES:
●All necessary cables can be obtained from your dealer.
●When you select “EDIT” to dub tapes in step 3, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.
Audio cable (not provided)
Camcorder
AUDIO OUT
EDIT
Player