![](/images/new-backgrounds/1280795/28079527x1.webp)
14 EN | INITIAL SETTINGS (cont.) |
Preset Download
Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Program Number Set
ATTENTION
You can use this function only with a TV offering
*Compatible with TVs offering
If you have connected the recorder to your TV via the AV connection ( pg. 10), the recorder will automatically perform Preset Download instead of the Auto Set Up in step 4 on page 13. After downloading, the recorder sets the clock and Guide Program numbers automatically.
Perform steps 1 to 3 of “Auto Set Up” on page 12 before continuing.
A Perform Preset Download.
Press OK. The AUTO
On the front display panel
Press rt to select “CH – –” and press OK or e.
On the on-screen display
Press rt to move the highlight bar (pointer) to
e.
Preset positions on the front display panel increase from “CH1”; do NOT press any button on the recorder or remote control until the front display panel shows clock time, “(CH) 1” or “–
●If you are using the
will appear. Then the GUIDE PROG SET screen will appear during Guide Program Number Set. When Preset Download is completed, “COMPLETED” appears for about 5 seconds, then the normal screen appears.
●If you press any button on the
recorder or remote control while downloading is in progress, it will be interrupted.
NOTES:
●For details, refer to the instruction manual of your TV.
●In the area where no TV station transmits a PDC (Programme Delivery Control) signal, the recorder can perform neither Auto Clock Set nor Auto Guide Program Number Set.
●If there is a power cut, or if you press 1 or MENU while downloading or set up is in progress, it will be interrupted; be sure to turn off the recorder power once and try again from the beginning.
●Auto Clock Set may not function properly depending on the reception condition.
●On this recorder, the characters available for station names (ID) are
downloaded stations may differ from those of your TV ( pg. 76).