EN 57
A Make connections.
Connect an audio component to the AUDIO L + R input connectors on the recorder’s front panel.
●When connecting a monaural audio component, use only the recorder’s AUDIO L input connector.
B Set the recorder’s input mode.
Press AUX (number key “0”) and/or PR to select “F-1” or “S-1”.
C Locate the start point.
Press 4 to start playback of the tape in your recorder, and press 9 when you reach the point where you want to start dubbing.
D Engage the Audio Dubbing mode.
Press A.DUB.
●Your recorder enters the Audio Dubbing Pause mode. (“o” blinks, “u” and “i” light up on the front display panel.)
●To perform Audio Dubbing with audio mixing, press AUDIO to select “a + s (L+R)” at this point.
*Audio Dubbing with audio mixing is not possible if you are using a monaural audio component, or if you don’t have an audio mixer.
E Start dubbing.
Engage the audio component’s Play mode, then press 4 to start the tape in your recorder; Audio Dubbing begins at this point.
●“o” blinks and “u” is displayed on the front display panel.
●To stop dubbing temporarily, press 9. Press 4 to resume dubbing.
F End Audio Dubbing.
Press 8 (or 0) to stop the tape in your recorder, and engage the audio component’s Stop mode.
NOTES:
●When monitoring the sound during Audio Dubbing, the normal soundtrack is automatically selected. If you wish to
hear the mixed sound
●Audio Dubbing stops automatically when the counter reaches “0:00:00”, and the recorder enters the Play mode. Check the counter reading before dubbing.
●Audio Dubbing is also possible using the rear panel AV1
●Audio Dubbing is not possible with cassettes whose record safety tab has been removed.
●When playing back an
