JVC LPT0328 specifications Next Function Memory, Digital TBC/NR, Repeat Playback, Manual Tracking

EN 23

Next Function Memory

The Next Function Memory “tells” the recorder what to do after rewinding. Before continuing, make sure the recorder is in the Stop mode.

a- For Automatic Start Of Playback

Press 3, then press 4 within 2 seconds. b- For Automatic Power Off

Press 3, then press 1 within 2 seconds. c- For Automatic Timer Standby

Press 3, then press # (TIMER) within 2 seconds.

Digital TBC/NR

Your recorder is equipped with the Digital TBC (Time Base Corrector) that removes jitter from fluctuating video signals to deliver a stable picture even with old tapes and rental cassettes. The on/off of Digital 3-DNR (Noise Reduction) which cuts noise and enables clear picture reproduction is also linked to this function.

* The default setting is on.

We recommend that you use Digital TBC/NR when...

... playing back a tape recorded on a camcorder.

... playing back a tape repeatedly used.

... using this video recorder as the source player for editing.

Activate Digital TBC/NR.

Press DIGITAL TBC/NR so that the DIGITAL TBC/NR indicator lights up.

●To turn off Digital TBC/NR, press DIGITAL TBC/NR again so that the indicator goes off.

NOTES:

●If you play back a tape recorded under poor TV reception condition, the picture may become more stable with Digital TBC/NR set to off.

●When Digital TBC/NR is set to on, if you play back a tape where certain types of signals are recorded (using a PC or some character generators), the playback picture may be distorted. If this is the case, turn off Digital TBC/NR.

●When playing back a MESECAM tape, Digital TBC/NR does not function even though the DIGITAL TBC/NR indicator is lit.

Repeat Playback

Your recorder can automatically play back the whole tape 100 times repeatedly.

1Start playback.

Press 4.

2Activate Repeat Playback.

Press 4 and hold for over 5 seconds, then release.

●The Play indicator ( u) on the front display panel blinks slowly.

●After playing back a tape 100 times, the recorder stops automatically.

3Stop Repeat Playback.

Press 8 at any time.

●Pressing 4, 3, 5 or 9 also stops Repeat Playback.

NOTE:

Manual Tracking

Your recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the PR buttons.

1Override automatic tracking.

Press p on the remote control.

2Adjust the tracking manually.

Press PR + or –.

3Return to automatic tracking.

Press p on the remote control.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Soundtrack Selection

Your recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing AUDIO changes the soundtrack as follows:

TRACK
		USE
Recorder’s Front	On-Screen
Display Panel	Display
a + s	HI FI	For Hi-Fi stereo
	L j h R	tapes
a	HI FI	For main audio of
	L j	Bilingual tapes
s	HI FI	For sub audio of
	h R	Bilingual tapes
NORM	NORM	For audio-dubbed
		tapes
a + s + NORM	HI FI	For audio-dubbed
	NORM	tapes

NOTES:

●“a + s” should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the normal audio track is played back automatically for tapes with only normal audio.

●For instructions on recording stereo and bilingual programmes, refer to page 30.

●“O.S.D.” must be set to “ON” or the on-screen displays will not appear ( pg. 69).

Repeat playback is not possible with a cassette recorded in EP mode.