JVC LVT0336-003A To connect to audio equipment with a digital input, To connect the power cord

Getting started

To connect to audio equipment with a digital input

You can enhance the sound quality by connecting the unit’s DIGITAL OUT (optical) to the digital input of an amplifier, DAT or MD by using an optional digital cable. The digital stereo audio signal from a disc is directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with built-in the decoder by using an optional digital cable, you can enjoy high-quality surround sound.

When you make the digital connection, also make the analog connection, because, depending on the disc type, no audio may be reproduced from the DIGITAL OUT.

English

Français

The unit

VIDEO OUT

VIDEO S-VIDEO Y PB PR

AV COMPU LINK

COMPONENT

LEFT PCM/STREAM

OPTICAL

RIGHT

AUDIO OUT DIGITAL OUT

Red White

Audio cable (not supplied)

Optical digital cable (not supplied)

	Digital equipment
Red	IN	IN
	RIGHT	DIGITAL
	AUDIO	OPTICAL
	LEFT
White

Getting started

•For digital connection, connect the unit’s DIGITAL OUT (optical) to the digital input of an audio equipment using an optional digital cable.

NOTES

•When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the “DIGITAL AUDIO OUTPUT” setting in the “PREFERENCE 2” on-screen display correctly according to the connected audio equipment. If the “DIGITAL AUDIO OUTPUT” is not set correctly, loud noise may be generated from speakers, causing damage of your speakers. See “DIGITAL AUDIO OUTPUT” on page 35.

•With the digital connection, the unit’s settings for COMPRESSION and DOWN MIX are invalid. Settings for these items must be made from the decoder.

To connect the power cord

When all the connections have been made, insert the power plug into the wall outlet firmly. The STANDBY indicator lights and setup is completed.

Warning

•Disconnect the power cord if you are not going to use the unit for a long time.

•Disconnect the power cord before cleaning the unit.

•Disconnect the power cord before moving the unit.

•Do not connect or disconnect the power cord with wet hands.

•Do not pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or other accidents.

Caution

•Do not damage, alter, twist, or pull the power cord, as this may cause fire, electric shock, or other accidents.

•Contact a dealer and get a new power cord if the cord is damaged. A damaged cord may cause fire, electric shock, or other accidents.

•Do not put anything heavy, or the unit, on the power cord, as this may cause fire, electric shock, or other accidents.

14