JVC LVT0336-003A manual Basic operations, Turning on/off the unit, Inserting and removing discs

Basic operations

Basic operations

In the following description, the buttons on the remote control unit are used, however, you may use the corresponding buttons on the front panel of the unit if available.

Turning on/off the unit

Press POWER on the front panel or press DVD POWER on the remote control unit.

SHUTTLE

XV-511 DVD PLAYER

POWER				PLAY
	POWER	STANDBY	DOLBY	SKIP
			3D PHONIC	STOPPAUSE

DVD / VIDEO CD / CD

OPEN/CLOSE

•You can turn on the unit by pressing the PLAY button on the front panel or the Remote control unit. In this operation, the unit starts playback when the disc is set. If no disc is set, the disc tray opens.

•You can also turn on the unit by pressing the OPEN/CLOSE button on the front panel or the remote control unit. In this case, the disc tray opens.

O P E N /	DVD
CLOSE	RETURN TV POWER POWER
	DVD POWER
	STOP PAUSE
	PLAY
TITLE	MENU
	ENTER
THEATER	ON SCREEN
POSITION

3D PHONIC SUBTITLE STROBE ANGLE

CANCEL RESUME ZOOM DIGEST

1	2	3	4
5	6	7	8
9	10	0	+10
TV/VIDEO		+	+
SHIFT		TV ch	TV VOL.
		–	–

RM-SV511U REMOTE CONTROL

Basic operations

NOTE

•Even if you press the POWER or DVD POWER button to turn off the unit, the unit is not disconnected from the AC power source as long as it is connected to the wall outlet. This state is called the standby mode. In this state, the unit is designed to consume a very small quantity of power.

Inserting and removing discs

1 Press OPEN/CLOSE to open the disc tray.

2 Place the disc in the tray.

With the playback side (non-label side) down.

• To insert an 8-cm disc, place it in the inner recess.

3 Press OPEN/CLOSE to close the disc tray.

You can also open and close the disc tray from the opening on-screen display.

Use CURSOR 5/° to move to , then press ENTER to open or close the disc tray.

NOTES

•The unit can playback DVD VIDEO, Audio CD, and Video CD discs only. Do not load other disc types. For details about playable disc types, see page 11.

•When loading a disc in the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the tray is closed, and the disc may not be removed from the unit.

17