JVC LVT0336-003A manual AV Compu Link remote control system, Connection and setup

Additional information

AV COMPU LINK remote control system

When you buy a separate TV, VCR, DVD player, receiver, or other components and connect them to each other, you have to operate each component individually. JVC’s AV COMPU LINK remote control system meets the demand for a system made up of single components and has the ease of operation of a single unit.

English

Français

Connection and setup

Using the AV COMPU LINK cable, connect the AV COMPU LINK terminals of each component to one another.

To AV COMPU LINK (II or EX)

TV

DVD player

•If you connect a DVD player with a television via AV COMPU LINK, set the DVD player’s AV COMPU LINK setting as follows.

•When connecting with VIDEO-1 input terminal of the television: DVD2

•When connecting with VIDEO-2 input terminal of the television: DVD3

To AV COMPU LINK (II or EX)

To AV COMPU LINK

TV

DVD player VCR (Video Cassette Recorder)

•If you connect a DVD player with a television and VCR via AV COMPU LINK, set the VCR’s Remote Control Code and DVD player’s AV COMPU LINK setting as follows.

•When connecting with VIDEO-1 input terminal of the television: DVD player’s AV COMPU LINK setting: DVD2

VCR’s Remote Control Code: B

•When connecting with VIDEO-2 input terminal of the television: DVD player’s AV COMPU LINK setting: DVD3

VCR’s Remote Control Code: A

Additional information

TV

Receiver DVD player

•If you connect a DVD player with a television and receiver via AV COMPU LINK, set the DVD player’s AV COMPU LINK setting to DVD1.

•The DVD player’s AV COMPU LINK setting is operated in the “PREFERENCE” display. See page 37 for operation.

•About the connection between the TV and the Receiver, refer to Receiver’s Instructions.

40