Getting started
To use the remote control unit for TV operation
English
Français
You can operate your TV from the remote control unit.
Setting the remote control signal for operating your TV.
1Holding down TV/VIDEO, enter the manufacturer code of your TV listed below by using the numeric buttons (0 - 9). Do not release TV/VIDEO. Keep holding it until the next step is completed.
Manufacturer code list
No. | Manufacturer | Example: | |
01 | JVC | To enter the manufacturer code "01": | |
|
| Press "0" then "1." | |
02 | MAGNAVOX | ||
| |||
|
|
| |
03 | MITSUBISHI |
| |
04 | PANASONIC |
| |
|
|
| |
05 | RCA |
| |
|
|
| |
06 | SHARP |
| |
07 | SONY |
| |
|
|
| |
08 | TOSHIBA |
| |
09 | ZENITH |
| |
|
|
| |
10 | HITACHI |
| |
11 | PANASONIC |
| |
|
|
| |
12 | SAMSUNG |
| |
|
|
| |
13 | SANYO |
| |
|
|
| |
14 | SANYO |
| |
|
|
| |
15 | SAMSUNG |
| |
|
|
|
Getting | started |
|
|
2Press STOP while holding down TV/VIDEO.
The following buttons can be used for operating the TV:
TV POWER | Turns the TV on or off. |
+Changes the TV channels.
TV ch
–
+Adjusts the TV volume.
TV VOL. |
|
– |
|
|
|
| Selects the TV channels |
| (while holding down the SHIFT button). |
0 to 9 | *For some TVs, pressing "+10" while holding down SHIFT |
| functions as the "+100," and pressing "10" while holding down |
| SHIFT functions as the "RETURN" button. |
TV/VIDEO
Switches input mode (either TV or VIDEO).
3Try to operate your TV by pressing TV POWER.
If your TV turns on or off, you have successfully set the control signal.
NOTE
•The remote control unit is initially set for operating a JVC TV.
•If there is more than one code listed for the manufacturer of your TV, try them one by one until you succeed.
16
