Operating the Tuner Using the On-Screen

Display

You can also operate the tuner using the on-screen display.

The on-screen display will disappear if no operation is done for about 1 minute.

7Storing the preset stations

1. Press MENU.

The MENU screen appears on the TV.

2. Press 5 or to move to “TUNER CONTROL,” then press 2 or 3.

The TUNER CONTROL menu appears.

7Operating the tuner

1. Press MENU.

The MENU screen appears on the TV.

MENU PLAY EXIT

/REW PAUSE FF/

SET

DOWN – TUNING – UP

STOP CONTROL

On-screen operating

buttons

3.Tune into a station you want to store on the TUNER CONTROL menu, referring to “Operating the tuner”.

4.Press 5 or to move to “PRESET MEMORY,”

then press 2 or 3.

moves to “PRESET CH” and the channel number starts flashing.

2. Press 5 or to move to “TUNER CONTROL,” then press 2 or 3.

The TUNER CONTROL menu appears.

3. Press 5 or to move to an item you want to set or adjust.

On the TUNER CONTROL menu, you can do the following:

BAND

: Select the band.

PRESET CH

: Select a preset channel station.

FREQUENCY

: Tune in a station manually.

FM MODE

: Select the FM reception mode.*

PRESET MEMORY

: See “Storing the preset stations” on

 

the right.

Note:

*“FM MODE” is not displayed when an AM station is selected.

4.Press 2 or 3 to select an item you want to use.

5.When you finish, press EXIT repeatedly until the menu disappears from the TV.

5.Press 2 or 3 to select a channel number you want.

6.Press SET to store the setting.

The selected channel number stops flashing.

7.Repeat steps 3 to 6 until you store all the stations you want.

8.When you finish, press EXIT repeatedly until the menu disappears from the TV.

29

Page 32
Image 32
JVC LVT0870-006A Operating the Tuner Using the On-Screen Display, Press 5 or ∞ to move to Tuner CONTROL, then press 2 or