
Adjusting the Sound Parameters for the
Surround and DSP
You can adjust the Surround and DSP sound parameters to your preference.
•Once you have made adjustment, it is memorized for each source.
7Adjustable parameters
You can adjust the following parameters:
For Surround, DAP, JVC Theater Surround and All Channel Stereo modes (when the center speaker is connected)
CENTER TONE | : Adjust the center tone. As the number |
(CTR TONE) | increases, the dialogue becomes clearer so |
| that the human voices change from soft to |
| sharp. (Normally select “3.” Adjustable range: |
| 1 to 5) |
|
|
For DAP modes and JVC Theater Surround
EFFECT LEVEL : Adjust the DAP effect level. As the
(EFFECT) number increases, the DAP effect becomes stronger. (Normally select “3.” Adjustable range: 1 to 5)
ROOM SIZE | : Adjust the virtual room size. As the |
(ROOMSIZE) | number increases, the interval between |
| reflections increases so that you will feel |
| as if you were in a larger room. (Normally |
| select “3.” Adjustable range: 1 to 5) |
|
|
LIVENESS | : Adjust the liveness effect. As the number |
| increases, the attenuation level of |
| reflections over time decreases so that |
| acoustics change from “Dead” to “Live.” |
| (Normally select “3.” Adjustable range: 1 to 5) |
|
|
Note:
You can only adjust the Effect Level when using a DAP mode with the
For Pro Logic II Music only
PANORAMA | : Select “ON” to add “wraparound” sound |
(PNRAMA) | effect with |
control | setting: “OFF”) |
|
|
CENTER WIDTH : Adjust the center channel localization
(CWIDTH) between the center speaker and the left/ right speakers. As the number increases, the center channel sound moves toward the left and right speakers. (Normally select “3.” Adjustable range: OFF and 1 to 7)
DIMENSION | : Adjust sound localization position. As the | |
| number increases, the sound localization | |
| moves towards forward from backward. | |
| (Normally select “4.” Adjustable range: 1 to 7) | |
|
|
|
Using the
1. Show EFFECT ADJUST menu (see page 38).
Parameters that are not adjustable for the currently selected Surround and DSP modes are skipped.
2.Press 5 or ∞ to move to a parameter you want to adjust.
3.Press 2 or 3 to adjust the parameter.
4.Repeat steps 2 and 3 to adjust the other parameters.
5.When you finish, press EXIT repeatedly until the menu disappears from the TV.
On the front panel:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
1. Press EFFECT repeatedly to select a | EFFECT SETT | |
parameter you want to adjust. |
|
|
|
|
•Each time you press the button, the items change as follows:
EFFECT = ROOMSIZE = LIVENESS =
CTR (center) TONE = PNRAMA (Panorama) = C (center) WIDTH = DIMENSION =
(Back to the beginning)
Parameters that are not adjustable for the currently selected Surround and DSP modes are skipped.
2. Press CONTROL UP 5 or | CONTROL | |
DOWN UP | ||
DOWN ∞ to adjust the sound | ||
| ||
parameter. |
|
3.Repeat steps 1 and 2 to adjust the other parameters.
Note:
Parameters that are not adjustable for the currently selected Surround
and DSP modes are skipped.
42