JVC LVT0953-001B manual English, Attach the terminal cover to the leg

4 Connect the speaker cord to the speaker terminal of the leg

•Use the 6-meter speaker cords for front speakers and 15-meter speaker cord for rear speakers.

•Each speaker cord has its name tag attached to one end. Attach the end without the name tag to the speaker terminal.

Tag

To the speaker terminal of the leg

1)Insert the speaker cord inside the stand as illustrated below.

•Pull the speaker cord out of the center of the stand by about 50 cm.

The cord with the black stripe is on this side, facing up.

Stand

2)Insert the tips of the speaker cord into the leg and pull them out as illustrated below.

Leg

3) Insert the speaker cord into the speaker terminal	English
inside the leg.
1 Press and hold the clamp.
2 Insert the exposed core of the speaker cord fully
into the terminal.

•Connect the cord with the black stripe to the · terminal.

3Release your finger.

1 2 3

Leg

The cord with the black stripe.

5 Attach the terminal cover to the leg.

Push cords fully inside the leg. Then fix the terminal cover using the screw you removed in step 1.

Terminal cover

Screw

grooves claws

To be continued on the next page

– 5 –