Recording on a cassette
|
|
|
|
| FM MODE/ |
4/¢ PAUSE | 3 2 2 BEAT CUT 2 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SEARCH UP
SEARCH DOWN
CD PORTABLE SYSTEM
1
The following marks are used to distinguish the two recording sources in the procedure below.
: When recording from the radio 
: When recording from a CD
1Load a cassette.
2Prepare the recording source.
: Set to the tuner mode and tune to a desired station (see pages 12 and 13).
: Load a CD and set to the CD stop mode (see page 9). You can specify a desired track to start recording by pressing 4 or ¢.
To start recording at the exact moment
1 In step 3 above, press 8 PAUSE before pressing ¶ REC.
2Press 8 PAUSE again to release the tape at the exact moment you want to start recording.
To remove beats during AM broadcast recording
Press FM MODE/BEAT CUT repeatedly to select the better
3Press ¶ REC to start recording.
The 2 PLAY button is also depressed with the ¶ REC
button.
: The CD player starts playback when the cassette deck enters the recording mode (synchronized recording).
To stop recording
To erase the recording
You can erase the recording on a tape without overwriting the tape with a new recording.
1Set to the CD stop mode with no disc loaded in the unit.
2Press ¶ REC to start erasing.
The 2 PLAY button is also depressed with the ¶ REC button.
Press § STOP/EJECT.
Recording also stops when the tape reaches the end.
: The CD player stops playback when the tape stops running at its end or by your pressing § STOP/
EJECT.
When the CD player reaches the end of the disc and stops playback earlier, the tape continues running. In this case, press § STOP/EJECT to stop the tape.
15
