CASSETTE OPERATIONS

Playing back a cassette

2 1 FF ¡ REW 4 3 1

English

SEARCH UP

SEARCH DOWN

RC-ST3

CD PORTABLE SYSTEM

1Press TAPE to set to the tape mode.

2Press § STOP/EJECT to open the cassette holder.

3Load a cassette with the open side up and the playback side facing out, then close the cassette holder.

4Press 2 PLAY to start playback.

To stop playback

Press § STOP/EJECT.

Playback automatically stops when the tape reaches the end.

To fast-wind a tape

Press 1 FF or ¡ REW.

To fast-wind in the forward direction: 1 FF

To fast-wind in the reverse direction: ¡ REW

When the tape reaches the end, press § STOP/EJECT to release the 1 FF or ¡ REW button.

Notes on cassette tapes

It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.

Use only normal tapes of type I for playback and recording.

Use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may occur and these tapes easily jam in the pinch roller and capstan.

Loose tape can cause trouble. If you notice some slack in the tape, tighten it up using a pencil.

To prevent accidental erasure

Remove the tab(s) with a screwdriver. When you want to erase the recording or re-record on the tape, reseal the slot(s) with adhesive tape.

14

Page 40
Image 40
JVC LVT1000-004A, 601-610000-030 manual Cassette Operations