Getting started

Precautions

General precautions

DO NOT disassemble the unit or remove screws, covers, or cabinet.

DO NOT expose the unit to rain or moisture.

DO NOT expose the unit to direct sunlight or place it near a heating device.

Locations

Install the receiver in a location that is level and protected from moisture and dust.

If water gets inside the unit, turn off the power and remove the plug from the outlet, then consult your dealer. Using the unit in this state may cause a fire or electrical shock.

Select a place which is level, dry and neither too hot nor too cold between 5˚C and 35˚C

Make sure there is good ventilation around the receiver. Poor ventilation could cause overheating and damage the receiver.

Leave sufficient distance between the unit and the TV.

Do not install the unit in a place subject to vibrations.

Handling the receiver

DO NOT touch the power cord with wet hands.

DO NOT pull on the power cord to unplug the cord. When unplugging the cord, always grasp the plug so as not to damage the cord.

Keep the power cord away from the connecting cords and the antenna. The power cord may cause noise or screen interference. It is recommended to use a coaxial cable for antenna connection, since it is well-shielded against interference.

When a power failure occurs, or when you unplug the power cord, the preset settings such as preset FM or AM (MW) channels and sound adjustments may be erased in a few days.

When you are away on travel or otherwise for an extended period or time, remove the plug from the wall outlet. A small amount of power is always consumed while the power cord is connected to the wall outlet.

To prevent the malfunction

There are no user-servicable parts inside. If anything goes wrong, unplug the power cord and consult your dealer.

Do not insert any metallic objects, such as wires, hairpins, coins, etc, into the unit.

Do not block the vents. Blocking the vents may damage the unit.

To clean the cabinet

Use a soft cloth. Follow the relevant instructions on the use of chemically-coated cloths.

Do not use benzene, thinner or other organic solvents and disinfectants. These may cause deformation or discoloring.

Checking the supplied accessories

Check to be sure you have all of the following supplied accessories. The number in parentheses indicates the quantity of each piece supplied.

Remote control (1)

Batteries (2)

AM (MW) loop antenna (1)

FM antenna (1)

SCART cable (1)

Digital coaxial cord (1)

Audio video cord (yellow/red/white) (1)

—not for using with RX-ES1SL

If anything is missing, contact your dealer immediately.

Putting batteries in the remote control

Before using the remote control, put two supplied batteries first.

1 Press and slide the buttery cover on the bac k of the remote control.

2 Insert batteries.

Make sure to match the polarity:

(+) to (+) and (–) to (–).

3 Replace the co ver.

If the range or effectiveness of the remote control decreases, replace the batteries. Use two R6P(SUM-3)/AA(15F) type dry-cell batteries.

Supplied butteries are for initial setup. Replace for continued use.

CAUTION:

Follow these precautions to avoid leaking or cracking cells:

Place batteries in the remote control so they match the polarity:

(+) to (+) and (–) to (–).

Use the correct type of batteries. Batteries that look similar may differ in voltage.

Always replace both batteries at the same time.

Do not expose batteries to heat or flame.

When using the remote control, aim the remote control directly at the remote sensor on the front panel.

RX-ES1SL

Remote sensor

XV-N55SL

Remote sensor

5

Page 10
Image 10
JVC LVT1002-001B Getting started, Precautions, Checking the supplied accessories, Putting batteries in the remote control

LVT1002-001B specifications

The JVC LVT1002-001B is a versatile and user-friendly remote control designed to enhance the experience of JVC audio and video products. Its sleek design and intuitive layout make it an indispensable accessory for users looking to navigate their entertainment systems seamlessly.

One of the most notable features of the JVC LVT1002-001B is its compatibility with a wide range of JVC devices. Whether you are operating a television, DVD player, Blu-ray player, or sound system, this remote control provides comprehensive functionality, eliminating the need for multiple remotes cluttering your living space. This universal compatibility makes it an ideal solution for households that utilize various JVC products.

The remote features a well-organized button layout, allowing users to access the most frequently used functions with ease. Large, clearly labeled buttons for volume control, channel selection, and playback functions ensure that users can make adjustments without hassle. Additionally, the remote includes dedicated buttons for quick access to settings and source selection, further enhancing its usability.

Among its advanced technologies, the LVT1002-001B employs infrared (IR) technology, which allows for reliable communication between the remote and the targeted JVC devices. This ensures that commands are executed promptly, providing a smooth and responsive user experience. Moreover, the remote is built with durable materials, designed to withstand everyday use, making it a long-lasting component of your audio-visual setup.

The JVC LVT1002-001B also includes features such as a range of programmable buttons, allowing users to personalize their experience. This means users can set up macros for their favorite activities, like watching a movie or listening to music, where multiple commands can be executed with a single button press, streamlining the entertainment experience.

Furthermore, the remote is designed with energy efficiency in mind. It uses standard batteries that are easy to replace, ensuring that users can keep their remote functional without hassle. The battery life is optimized to last longer, reducing the frequency of replacements and contributing to a more eco-friendly lifestyle.

In summary, the JVC LVT1002-001B remote control combines functionality, durability, and user-friendly features into one device, making it an essential tool for anyone looking to enhance their JVC audio and video experience. Its universal compatibility, intuitive design, and programmable options highlight its role as a key accessory for modern entertainment systems.