JVC LVT1002-001B Reinforcing the bass-B.BOOST, Adjusting the front speakers output balance-BAL

Sound adjustments

Setting the subwoofer audio position

When a stereo source is played back, the subwoofer sound is reinforced compared to the sound from a multi-channel source. Once you have set the subwoofer audio position, the subwoofer output level is decreased by the selected value when a stereo source is played back. The A (audio).POSITION indicator lights up when this function is activated.

•You have to make this adjustment for each source.

Reinforcing the bass—B.BOOST

You can boost the bass level—Bass Boost.

•You have to make these adjustments for each source.

ON: Select to boost the bass level (Bass Boost).

The BASS BOOST indicator lights up on the display.

OFF*: Select to deactivate Bass Boost.

From the remote control ONLY:

Press A.POSTION repeatedly to select the subwoofer audio position level from “–2 (dB),”“–4 (dB),” and “–6 (dB).”

The smaller the number becomes, the more the level decreases automatically when listening in

AUDIO	SUBTITLE TITLE/GROUP RETURN
ZOOM		BASS	TREBLE
	1	2	3
		BASS	TREBLE
VFP	4	5	6
	7	8	9
ANGLE	TV RETURN		100+
	10	0	+10
REPEAT
	3D
DIMMER	SLEEP	ANALOG/DIGITAL CANCEL

*Initial setting

NOTE

This function affects the sound coming out only through the front speakers.

stereo.

•If no adjustment is required, select “OFF” (initial setting).

		INPUT
SMART S. SETUP	BASS BOOST	A.POSITION
		TONE
		SURROUND
TEST	EFFECT	DECODE
SUBWFR	CENTER	L SURR R

When using the remote control:

Press BASS BOOST.

•Each time you press the button, Bass Boost turns on and off alternately.

AUDIO	SUBTITLE TITLE/GROUP RETURN
ZOOM		BASS	TREBLE
	1	2	3
		BASS	TREBLE
VFP	4	5	6
	7	8	9
ANGLE	TV RETURN		100+
	10	0	+10
REPEAT
	3D

NOTES

•The maximum subwoofer output level is –10 dB.

Ex:

When setting the subwoofer output level to “−8 (dB)” and the subwoofer audio position to “−4 (dB),” the subwoofer output level when listening in stereo will be −10 dB.

•This function does not take effect when activating a Surround mode.

DIMMER	SLEEP ANALOG/DIGITAL CANCEL
		INPUT
SMART S. SETUP	BASS BOOST	A.POSITION
		TONE
		SURROUND
TEST	EFFECT	DECODE
SUBWFR	CENTER	L SURR R

Adjusting the front speakers output balance—BAL

If the sounds you hear from the front right and left speakers are unequal, you can adjust the speakers output balance.

•You have to make this adjustment for each source.

•You cannot use the remote control for this setting.

BAL*: To adjust the front speakers balance.

•“CENTER” to “L-21”: Decrease the left channel output.

•“CENTER” to “R-21”: Decrease the right channel output.

*“CENTER” is the initial setting.

Attenuating the input signal—ATT

When the input level of analogue source is too high, the sound will be distorted. If this happens, you need to attenuate the input signal level to prevent the sound distortion.

•You have to make this adjustment for each analogue source.

•You cannot use the remote control for this setting.

ON:Select to attenuate the input signal level.

The INPUT ATT indicator lights up on the display.

NORMAL*: Select to deactivate attenuation.

*Initial setting

22