JVC LVT1002-001B manual Connecting the power cord, Getting started, RX-ES1SL, Monaural

Getting started

Analogue connection for DVD MULTI playback (see page 34)

•DVD MULTI playback is not available for XV-N55SL.

RX-ES1SL

FM 75		AM LOOP			VCR	AV IN / OUT	TV
		ANTENNA
COAXIAL	AM EXT CENTER		AUDIO
	L			L	DVD	AV IN	STB
	R			R
DVD		SUB	SURR
IN	FRONT
		WOOFER	(REAR)

		CENTER	AUDIO
	L		L
	R		R
DVD		SUB	SURR
IN	FRONT
		WOOFER	(REAR)

				DIGITAL 1	CENTER	SURROUND	FRONT
				(DVD)	SPEAKER	SPEAKERS	SPEAKERS
						RIGHT LEFT RIGHT LEFT
DIGITAL 3	DIGITAL 2			CAUTION:			Monaural
(TV)	(STB)		DIGITAL IN
				SPEAKER			audio cord
		SUBWOOFER		IMPEDANCE
			OUT	8 ~ 16

(not supplied)

Stereo audio cord (not supplied)

Monaural audio cord (not supplied)

DVD Player (ex. XV-NA7SL)

To center channel audio output

To surround left channel audio output

To surround right channel audio output

To subwoofer output

To front right channel audio output

To front left channel audio output

Stereo audio cord (not supplied)

NOTE

When using the DVD MULTI playback, use the same DVD player connected to this receiver by a SCART cable. If you connect a different DVD player, the mixed sound from front left and right channels are reproduced.

Connecting the power cord

When all the audio/video connections have been made, connect the AC power plug to the wall outlet. Make sure that the plugs are inserted firmly. The STANDBY lamp on the receiver and indicator on the DVD player light in red.

•Keep the power cord away from the connecting cables and the antenna. The power cord may cause noise or screen interference.

NOTES

•The preset settings such as preset channels and sound adjustment may be erased in a few days in the following cases:

–when you unplug the power cord.

–when a power failure occurs.

•Disconnect the power cord:

–if you are not going to use the player for a long period of time.

–before cleaning the player.

–before moving the player.

•Do not:

–connect or disconnect the power cord with wet hands.

–pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or other accidents.

CAUTIONS:

•Do not touch the power cord with wet hands.

•Do not alter, twist or pull the power cord, or put anything heavy on it, which may cause fire, electric shock, or other accidents.

•If the cord is damaged, consult a dealer and have the power cord replaced with a new one.

10