JVC LVT1002-001B XV-N55SL, Troubleshooting, Problem, Possible Cause, Solution, Plug in securely

Troubleshooting

XV-N55SL

PROBLEM	POSSIBLE CAUSE	SOLUTION
The power does not come on.	Power plug is not inserted securely.	Plug in securely.

Power

“REGION CODE ERROR!” is shown on	Region code of the inserted disc does not	Check the region code of the disc printed on the disc
the TV screen.	match the player.	jacket.
Operation is not possible.	Microcomputer malfunction due to	Turn off the power and unplug the power cord, then
	lightning or static electricity.	connect the power cord again.
	Moisture condensation caused by a	Turn off the power, then turn it on a few hours later.
	sudden change of temperature or
	humidity.
	The disc does not allow the operation, or	Check and replace the disc (see page 35).
	an unplayable disc is inserted.
[LOCK] is displayed on the display	When you press 0 while pressing down 7	The disc tray cannot be opened or closed in this
window and the disc tray does not	on the player in standby mode, the tray	status. To release this status, press 0 while pressing
open.	lock function is activated.	down 7 on the player in standby mode.
Picture is noisy.	The player is connected to a VCR directly	Connect the player so that the picture signal flows
	and the copyguard function is activated.	directly to the TV.
	With some discs, the picture may be	Set [PICTURE SOURCE] to [VIDEO (NORMAL)] or
	blurred when [PICTURE SOURCE] is set	[VIDEO (ACTIVE)].
	to [FILM] or [AUTO].
Color and brightness do not display	Multiple devices are connected using	Connect only one cable to the connector you want to
correctly.	multiple connectors; the SCART	use.
	connector, the S-VIDEO connector and
	composite connector.
Picture is colorless when connecting a	VIDEO SIGNAL SELECTOR on the rear is	Set the VIDEO SIGNAL SELECTOR on the rear to
TV to the composite video out jack of	set to “Y/C.”	“RGB/COMP.”
the player.
No picture is appears when connecting	VIDEO SIGNAL SELECTOR on the rear is	Set the VIDEO SIGNAL SELECTOR on the rear to
a TV to the S-VIDEO output of the	set to “RGB/COMP.”	“Y/C.”
player.
DVD VIDEO disc playback sound level	[D.RANGE CONTROL] preference is set	Set the [D.RANGE CONTROL] preference to [TV
is lower than TV broadcast sound level.	to other than [TV MODE].	MODE] (see page 56).
Analog audio output is distorted.	[OUTPUT LEVEL] preference is set to	Set the [OUTPUT LEVEL] preference to [LOW] (see
	[STANDARD]	page 56).
No sound comes out.	MP3/WMA disc is recorded with the	It cannot be played.
	“packet writing (UDF format).”
Files (tracks) are not played in the		This player plays the files in the alphabetic order.
recorded order.		So, the playback order can vary.
WMA files cannot be played back.	The file is copy protected.	The player cannot play copy protected files.
	The file is recorded with a bit rate under	The player does not support such WMA files.
	48 kbps.

Operation

Picture

Audio

MP3/WMA

67