Changing the initial settings

MP3&WMA/JPEG

The player can play MP3/WMA and JPEG files recorded on a CD-R/CD-RW disc. However, if a disc contains both MP3/WMA and JPEG files, you can only play files of the type selected in this menu item.

Setting options

MP3&WMA, JPEG

[MP3&WMA]: when selected, only MP3/WMA files can be played back.

[JPEG]: when selected, only JPEG files can be played back.

AUDIO menu

DIGITAL AUDIO OUTPUT

To connect the player’s digital output to an external device equipped with a digital input, this item must be set correctly. See “Appendix C: Digital output signal chart” on page 60 for details about the relation between the setting and output signals.

Setting options

PCM ONLY, DOLBY DIGITAL/PCM, STREAM/PCM

[PCM ONLY]: select when you connect the DIGITAL OUT jack of the player to the linear PCM digital input of other audio equipment.

[DOLBY DIGITAL/PCM]: select when you connect the digital input of a Dolby Digital decoder or an amplifier with a built-in Dolby Digital decoder.

When this option is selected, playing back a disc recorded by the MPEG Multichannel format outputs a linear PCM digital signal.

[STREAM/PCM]: select when you connect the digital input of an amplifier with a built-in DTS, MPEG Multichannel or Dolby Digital decoder, or the stand-alone unit of such a decoder.

With some DVD VIDEO discs that are not fully copy-protected, a 20 or 24 bit digital signal may be output.

A signal recorded with the 96 kHz or higher sampling frequency is output from the DIGITAL OUT jack with the 48 kHz sampling frequency.

When playing a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers.

ANALOG DOWN MIX

To correctly play the audio on a DVD VIDEO disc recorded with surround multichannel audio, you must set this item properly according to your audio system configuration.

(This function does not work when the 3D PHONIC function is activated.)

Setting options

DOLBY SURROUND, STEREO

[DOLBY SURROUND]: select when listening to multichannel surround audio with the player’s analog AUDIO OUT terminals connected to a surround decoder.

[STEREO]: select when listening to conventional two-channel stereo audio with the player’s AUDIO OUT terminals connected to a stereo amplifier/receiver or television set, or in case you want to record the audio from a DVD VIDEO disc to MiniDisc, cassette, etc.

D. RANGE CONTROL

This setting provides optimal audio quality from the analog AUDIO OUT terminals for listening to DVD VIDEO discs recorded in Dolby Digital format, at low or middle volume.

Setting options

WIDE RANGE, NORMAL, TV MODE

[WIDE RANGE]: when selected, audio is played back with the widest dynamic range so that you can enjoy powerful playback sound.

[NORMAL]: normally, select this option.

[TV MODE]: select if DVD VIDEO disc sound level is lower than TV program sound level. Thus you can hear sound at a lower volume clearly.

OUTPUT LEVEL

This setting allows you to attenuate the level of the signal output from the player’s analog AUDIO OUT terminals.

Setting options

STANDARD, LOW

• If the sound output from the speaker is distorted, select [LOW].

OTHERS menu

RESUME

You can select the resume playback mode.

see page 38 and 39 for details about the resume playback function.

Setting options

ON, OFF, DISC RESUME

[ON]: when selected, the player can resume playback of the disc from the position where playback was last interrupted, if the disc is still in the disc tray.

[OFF]: when selected, the resume function is deactivated.

[DISC RESUME]: when selected, the player can resume playback of the last 30 discs played. The player retains a memory of the interrupted positions of the last 30 discs played, even though they have been removed from the disc tray.

ON SCREEN GUIDE

The player can display “on-screen guide” icons or characters on the picture, which show what is happening to the disc or the player.

Example of “on-screen guide” icons: , ,

Setting options

ON, OFF

[ON]: when selected, the on-screen guide is activated.

AUTO STANDBY

When the player is stopped for more than 30 minutes or 60 minutes, the player enters standby mode automatically.

Setting options

60, 30, OFF

AV COMPULINK MODE

This item is provided for use in the future. Leave it as the default setting (“DVD 1”).

PARENTAL LOCK

When this option is selected, pressing ENTER on the remote control unit brings up the PARENTAL LOCK display shown below. This allows you to restrict children from playing DVD VIDEO discs.

PARENTAL LOCK

 

COUNTRY CODE

GB

SET LEVEL

NONE

PASSWORD

_ _ _ _

EXIT

 

SELECT

USE 5∞ TO SELECT, USE ENTER TO CONFIRM

ENTER

TO EXIT, PRESS CHOICE.

• See page 57 for details about the parental lock setting.

56

Page 61
Image 61
JVC LVT1002-001B manual Audio menu, Others menu

LVT1002-001B specifications

The JVC LVT1002-001B is a versatile and user-friendly remote control designed to enhance the experience of JVC audio and video products. Its sleek design and intuitive layout make it an indispensable accessory for users looking to navigate their entertainment systems seamlessly.

One of the most notable features of the JVC LVT1002-001B is its compatibility with a wide range of JVC devices. Whether you are operating a television, DVD player, Blu-ray player, or sound system, this remote control provides comprehensive functionality, eliminating the need for multiple remotes cluttering your living space. This universal compatibility makes it an ideal solution for households that utilize various JVC products.

The remote features a well-organized button layout, allowing users to access the most frequently used functions with ease. Large, clearly labeled buttons for volume control, channel selection, and playback functions ensure that users can make adjustments without hassle. Additionally, the remote includes dedicated buttons for quick access to settings and source selection, further enhancing its usability.

Among its advanced technologies, the LVT1002-001B employs infrared (IR) technology, which allows for reliable communication between the remote and the targeted JVC devices. This ensures that commands are executed promptly, providing a smooth and responsive user experience. Moreover, the remote is built with durable materials, designed to withstand everyday use, making it a long-lasting component of your audio-visual setup.

The JVC LVT1002-001B also includes features such as a range of programmable buttons, allowing users to personalize their experience. This means users can set up macros for their favorite activities, like watching a movie or listening to music, where multiple commands can be executed with a single button press, streamlining the entertainment experience.

Furthermore, the remote is designed with energy efficiency in mind. It uses standard batteries that are easy to replace, ensuring that users can keep their remote functional without hassle. The battery life is optimized to last longer, reducing the frequency of replacements and contributing to a more eco-friendly lifestyle.

In summary, the JVC LVT1002-001B remote control combines functionality, durability, and user-friendly features into one device, making it an essential tool for anyone looking to enhance their JVC audio and video experience. Its universal compatibility, intuitive design, and programmable options highlight its role as a key accessory for modern entertainment systems.