JVC LVT1002-001B Connecting the FM and AM MW antennas, Getting started, FM antenna connection

Getting started

Connecting the FM and AM (MW) antennas

If FM reception is poor, connect outdoor FM antenna (not supplied).

If AM (MW) reception is poor, connect an outdoor single vinyl-covered wire (not supplied).

1 2 3

AM (MW) loop antenna (supplied)

Snap the tabs on the loop into the slots of the base to assemble the AM (MW) loop antenna.

FM antenna (supplied)	FM 75	AM LOOP
		ANTENNA
	COAXIAL	AM EXT

75 FM

COAXIAL

FM 75	AM LOOP
	ANTENNA

COAXIAL	AM EXT		AUDIO
		CENTER
	L		L
	R		R
DVD		SUB	SURR
IN	FRONT
		WOOFER	(REAR)

VCR	AV IN / OUT	TV			DIGITAL 1	CENTER
					(DVD)	SPEAKER
		DIGITAL 3	DIGITAL 2	DIGITAL IN
		(TV)	(STB)
DVD	AV IN	STB			CAUTION:
					SPEAKER
			SUBWOOFER		IMPEDANCE
				OUT	8 ~ 16

RX-ES1SL

SURROUND FRONT

SPEAKERS SPEAKERS

RIGHT LEFT RIGHT LEFT

AM (MW) antenna connection NOTES

Connect the AM (MW) loop antenna supplied to the AM LOOP terminals.

Connect the white cord to the AM EXT terminal, and the black cord to

Hterminal.

Turn the loop until you have the best reception.

•If the reception is poor, connect an outdoor single vinyl-covered wire (not supplied) to the AM EXT terminal. Keep the AM (MW) loop antenna connected.

•If the AM (MW) loop antenna wire is covered with vinyl, remove the vinyl while twisting it as shown on the right.

•Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. This could cause poor reception.

FM antenna connection

Connect the FM antenna supplied to the FM 75 Ω COAXIAL terminal as temporary measure.

Extend the supplied FM antenna horizontally.

•If the reception is poor, connect an outdoor FM antenna (not supplied). Before attaching a 75 Ω coaxial cable with a connector (IEC or DIN 45325), disconnect the supplied FM antenna.

6