JVC SP-UXG45, LVT1520-005B, CA-UXG45 manual Setting the Clock Remote

Changing the Display Brightness—DIMMER

Remote

ONLY

You can dim the display window.

DIMMER DIM ON

DIM OFF

(Canceled)

Setting the Clock Remote

ONLY

Without setting the built-in clock, you cannot use the Daily Timer and Recording Timer (see page 23).

•To exit from the clock setting, press CLOCK/TIMER as required.

•To go back to the previous step, press CANCEL.

1Activate the clock setting mode.

CLOCK /TIMER

•If you have already adjusted the clock before, press the button repeatedly until the clock setting mode (see page 23) is selected.

2Adjust the hour.

PRESET UP

SET/RESUME

PRESET DOWN

3Adjust the minute.

PRESET UP

SET/RESUME

PRESET DOWN

“CLOCK OK” appears and the built-in clock starts working.

To check the current time during play

DISPLAY Clock

Source information

If there is a power failure

The clock loses the setting and is reset to “0:00.” You need to set the clock again.

English

16