JVC CA-UXG45 Setting the ClockRemote, English, Changing the Display Brightness-DIMMER, Dim On

Changing the Display Brightness—DIMMER

Remote

ONLY

You can dim the display window.

DIMMER DIM ON

DIM OFF

(Canceled)

Setting the Clock Remote

ONLY

Without setting the built-in clock, you cannot use the Daily Timer and Recording Timer (see page 23).

•To exit from the clock setting, press CLOCK/TIMER as required.

•To go back to the previous step, press CANCEL.

1Activate the clock setting mode.

CLOCK /TIMER

•If you have already adjusted the clock before, press the button repeatedly until the clock setting mode (see page 23) is selected.

2Adjust the hour.

PRESET UP

SET/RESUME

PRESET DOWN

3Adjust the minute.

PRESET UP

SET/RESUME

PRESET DOWN

“CLOCK OK” appears and the built-in clock starts working.

To check the current time during play

DISPLAY Clock

Source information

If there is a power failure

The clock loses the setting and is reset to “0:00.” You need to set the clock again.

English

16