JVC CA-UXG45 manual English, Playing Back a Tape, Playing Back Other Equipment, To insert a tape

English

Playing Back a Tape

To insert a tape

You can play back type I tapes.

Push Insert Close

With the tape side facing front

To start: To stop:

To rewind tape:

Wind forward the tape.

Rewind the tape.

Playing Back Other Equipment

To connect other equipment

By using an stereo mini plug cord (not supplied), you can connect equipment with analog audio output jacks such as a Digital Audio Player, or a TV, etc.

Stereo mini plug cord (not supplied)

AUX	Portable audio
	device,
(front panel)	Game machine, etc.

If the audio output on the other equipment is not stereo mini plug type,

Use a plug adapter to convert the stereo mini plug to the corresponding plug of the audio output.

Refer to the manuals supplied with the other equipment.

IMPORTANT

•Always set volume to “VOL-MIN” when connecting or disconnecting the other equipment.

To adjust the sound input level from other equipment

You can adjust the sound input level from the connected equipment, if the incoming signal is too small or too large.

1Select AUX for the source.

2Adjust the input level.

2sec.

SET/RESUME AUX LVL 1

AUX LVL 2

AUX LVL 1: Ordinary input level (factory setting). Suitable for equipment with low output level (such as a portable audio device).

AUX LVL 2: Decreased input level.

Suitable for equipment with high output level (such as a DVD player).

memo

•If you feel that the output level from the external equipment is high, select AUX LVL2.

13