JVC SP-UXG45 Synchronized Disc Recording, English, To record the entire disc, Beat, broadcast

Synchronized Disc Recording

You can start and stop both disc, USB memory and DAP playback and tape recording at the same time.

To record the entire disc

Set “RESUME” on (see page 12).

1 Load a disc and insert a recordable cassette.

•If the current playing source is not the CD player, press CD 6, then 7.

•The display will show “RESUME”. Press 7to stop the system for the recording.

2 Start recording.

On the main unit

3 Flip the cassette tape manually to the opposite side.

•When the tape has reached the end, both the tape and the disc will stop. The display will show “RESUME”. Press REC after flipping the cassette tape to the opposite side to resume recording from the beginning of the current track.

•When the disk has finished playing back all the tracks, both the tape and the disk will stop.

To record Program Play or Random Play

1Select Program Play (and make a program) or Random Play.

2Press REC to start recording.

To protect your recording

Cassettes have two small tabs on the back to protect from unexpected erasure or re-recording.

To protect your recording, remove these tabs.

To re-record on a protected tape, cover the holes with adhesive tape.

If the beat is heard while recoding an AM	Remote
broadcast	ONLY

FM MODE BEAT 1

BEAT 2

• Select “BEAT 1” or “BEAT 2” to reduce the beat.

English

22