JVC LYT0089-001A specifications Access Delete Execute Menu Screen, Case of Select

EN59

In case of “SELECT”

N E X T < DELETE >		5
01	02
04	05	06
		6

ACCESS DELETE EXECUTE MENU SCREEN

Rotate the MENU Jog Dial to move the highlight bar to “CANCEL” or “ENTER”, then press it.

•“CANCEL” does not delete the selected still images and the screen returns to the Menu Screen.

•“ENTER” deletes the selected still images. While “ENTER” blinks, they are in the process of being deleted from memory. After deleting is finished, the screen returns to the Menu Screen.

CLOSE MENU

Press the MENU Jog Dial again to exit the Menu Screen.

If you check the remaining still images on Index Menu Screen after deleting . . .

E X I T	<INDEX>
01	02	03
04	05	06

CAUTION:

While “ENTER” is selected on the Delete Execute Menu and it is blinking, switching off the camcorder or removing the power supply unit (battery pack or AC Power Adapter/Charger) may cause the camcorder’s built-in memory to become corrupt. Never remove the power supply unit at this stage.

NOTES:

●Before deleting some still images stored in memory, perform “Protect” for the necessary ones (☞ pg. 59) or

save them on a PC so that you do not lose them accidentally (☞ pg. 61).

●Even if “ALL” is selected on the Delete Menu Screen, it is not possible to delete a still image with a padlock mark. “ALL” only deletes all still images that are not protected. After images are deleted from memory, the remaining images are automatically moved up to fill in any gaps in the numerical sequence. The Index No. for images protected (with the padlock mark) may therefore change.

●When selecting the desired still image in step 4, to move the frame from No. 7 to 6, place the highlight bar on “EXIT” by rotating the MENU Jog Dial upward. Rotate it further upward to move the frame to No. 6. Perform the same procedure for still images that follow the 13th one.

●On the Delete Select Menu Screen, a star mark is displayed next to a still image you shot in the FINE mode.