76
EN
TROUBLESHOOTING
SYMPTOM
POWER
No power is supplied.
The power suddenly goes off and doesn’t come back on by itself.
OTHER
POSSIBLE CAUSE(S)
●The battery pack has not been attached correctly (☞ pg. 8).
●The battery pack is not charged (☞ pg. 8).
●The power supply has not been correctly connected (☞ pg. 9).
●The battery pack has completely discharged.
●Remove the cassette and disconnect the power source, then after a few minutes, try turning the power back on. If it still doesn’t come on, consult your nearest JVC dealer.
Some functions are not available.
Vertical white lines appear when shooting a very bright object.
Bright,
An error number (i.e. E03) appears.
The image is out of focus.
Even though the Lens Cover is open, the Lens Cover Warning indicator blinks.
●The Select Dial is set to “AUTO LOCK”.
●This sometimes occurs when the contrast between the background and the object is great. It is not a defect of the camcorder.
●Sunlight is directly entering the lens. This is not a defect of the camcorder.
●Turn the camcorder’s power off, then disconnect the power source. After a few minutes, try turning the power on again. If the error number still appears, consult your nearest JVC dealer.
●The dioptre needs to be adjusted (☞ pg. 12).
●The scene being shot is adversely affecting the operation of Auto Focus (☞ pg. 34).
●The Lens Cover Warning indicator may blink when the camcorder is used in dark areas, regardless of the position of the Lens Cover.
The camcorder is a
