EN 57
Protect
This mode helps prevent accidental erasure of images.
Put a padlock mark next to the desired still image, and
that still image cannot be deleted.
ACCESS MENU SCREEN
1
Press the MENU Jog Dial.

ACCESS PROTECT MENU SCREEN

2
Rotate the MENU Jog Dial to move the highlight bar
to “PROTECT”, then press it.
•If you do not want to perform “Protect” for any still
image, go to step 4.

SET PROTECT

3
Rotate the MENU Jog Dial to move the frame to the
desired still image, then press it. The padlock mark
appears above the selected image.
•On the Protect Menu Screen, all still images are
displayed six at a time. To perform “Protect” for
the still images that come after the 6th one, rotate
the MENU Jog Dial to move the frame from Index
No. 1 to No. 6, then rotate it further downward.
The frame is placed automatically on the 7th still
image. Images after the 7th one can also be
accessed in the same way.
•To complete “Protect”, go to step 4.
CLOSE MENU
4
Rotate the MENU Jog Dial upward to place the
highlight bar on “EXIT”, then press it twice.

To remove “Protect”. . .

Perform steps 1 and 2, rotate the MENU Jog Dial to move
the frame to the desired still image with the padlock
mark, then press it. The padlock mark located above the
still image disappears and the image is no longer
protected. When finished removing protection, perform
step 4.
NOTES:
●
To move the frame from Index No. 7 to 6, place the
highlight bar on “EXIT” by rotating the MENU Jog Dial
upward. Rotate the MENU Jog Dial further upward.
The frame is moved to the 6th still image automatically.
Perform the same procedure for still images that follow
the 13th one.
●
On the Protect Menu Screen, a star mark is displayed
next to a still image you shot in the FINE mode.
MENU
INDEX
SLIDE SHOW 1
SLIDE SHOW 2
PROTECT
DELETE
4
MENU END
01
04
03
06
02
05
<
PROTECT
>
EXIT
01
04
03
06
02
05
<
PROTECT
>
EXIT
MENU Jog Dial
Set the System Select
Switch to “D.S.C.”.
Menu Screen
Protect Menu Screen
A padlock mark appears.