JVC LYT0089-001A Basic Recording, Load a Cassette, Enter RECORD-STANDBY Mode, Start Shooting

16ENVIDEORECORDING

BasicRecording

LENS COVER Switch

Power indicator

Power Switch

Start/Stop Button

System Select Switch

Tally lamp

(lights while recording is in progress)

NOTE:

You should already have performed the procedures listed below. If not, do so before continuing.

●Power (☞ pg. 6)

●Tape Length Setting (☞ pg. 12)

●Recording Mode/Tape Length Setting (☞ pg. 14)

●Grip Adjustment (☞ pg. 10)

LOAD A CASSETTE

1 Slide EJECT to open the cassette holder, then insert the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked.

ENTER RECORD-STANDBY MODE

2 Slide the LENS COVER Open/Close Switch to open

the lens cover. Set the System Select Switch to “VIDEO”, then set the Power Switch to “CAMERA”.

•The power indicator lights and the camcorder enters the Record-Standby mode.

•The scene you’re aimed at appears on the viewfinder screen, with the word “PAUSE” superimposed upon it.

START SHOOTING

3 Press the Recording Start/Stop Button.

•“REC ” appears in the viewfinder while recording is in progress.