JVC LYT0216-001B specifications Pro Snapshot, Press the Progressive Button Snapshot Button

28ENRECORDING

AdvancedFeatures(Cont.)

Pro Snapshot

Use your camcorder like a regular camera and take a snapshot, or several of them in succession.

Progressive Button

E	O
ID

V					B
T			S	R	A
O		N
	HSPA
Progressive Dial
Power Dial					AY
					P
					L
					OFF
					A
Lock button					M
					5S

Display

PHOTO

During snapshot

1 SELECT OPERATION MODE

First turn the Power Dial to “ A ”, “ M ”, “5S” or “” while pressing down the lock button located on the dial. Make sure the viewfinder is pulled out or the LCD monitor is open fully.

2 SELECT PRO SNAPSHOT MODE Choose the appropriate mode among five Pro Snapshot modes (☞ pg. 29) by turning the Progressive Dial (SNAPSHOT Dial).

3 TAKE PRO SNAPSHOT (Except for colour bar)

Press the Progressive Button (SNAPSHOT Button).

If you press during Record-Standby . . .

.... “PHOTO” appears and a still image will be

recorded for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode.

If you press during Recording . . .

.... “PHOTO” appears and a still image will be

recorded for approx. 6 seconds, then the normal recording resumes.

To Perform Pro Snapshot Recording During Progressive Video Recording (☞ pg. 44) . . .

.... turn the Progressive Dial to the Pro Snapshot

mode you want, then press the Progressive Button. To end recording, set the Progressive Dial to “VIDEO” again, then press the Progres- sive Button.