58ENPLAYBACK

AdvancedConnections

Connection To A Personal Computer

This camcorder can transfer still images to a personal computer by using the provided software when connected as shown in the illustration below. It is also possible to transfer still images to a personal compu- ter with a DV connector-equipped capture board installed.

Connector is under the cover.

Connector is under the cover.

To DV OUT connector

To AC outlet

To DC IN jack

Core filter

DC cord

JLIP (DIGITAL STILL) output connector

Core filter

To RS-232C

 

JLIP-PC connection cable (provided)

PC

DV cable (optional)

To DV

VC-VDV204U

connector

Core filter

 

AC Power

PC with DV

Adapter/Charger

connector-

equipped

(provided)

capture board

 

To DC OUT jack

 

1 CONFIRM POWER-OFF STATUS Make sure the camcorder and PC are turned off.

2 CONNECT CAMCORDER TO PC Pull out the connector cover and open it. Connect the camcorder to a PC using the cable according to your PC type as shown in the illustration.

3 SUPPLY POWER

Connect the camcorder to the AC Power Adapter/Charger using the DC cord, then plug the AC Power Adapter/Charger's power cord into an AC outlet.

4 TURN ON POWER

Turn the camcorder's Power Dial to "PLAY" while pressing down the lock button located on the dial and turn on the PC.

NOTES:

When transferring still images, never use the battery pack installed in the camcorder as the power supply. Use the provided AC Power Adapter/Charger.

Never connect the JLIP-PC connection cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

The date/time information cannot be captured into PC.

Also refer to the instruction manuals of the provided Software and the DV connector-equipped capture board.

Page 58
Image 58
JVC LYT0216-001B specifications Connection To a Personal Computer, Supply Power