EN73

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

26.There are disturbances in audio and video.

26.•If Audio Dubbing or Insert Editing have been performed repeatedly on the same portion of the tape, disturbance to the sound and picture may result.

26.•Use a new, or infrequently used, tape for Audio Dubbing and Insert Editing (pg. 68, 69).

27. During recording, the

27. •“DISPLAY” is set to “OFF” in

27. •Set “DISPLAY” to “ON” in

date/time does not

the Date/Time Menu.

the Date/Time Menu

appear.

•Interface shooting is

(pg. 11).

 

performed.

•During interface shooting,

 

 

the date/time does not

 

 

appear (pg. 23).

 

 

•Press the ON/OFF button

 

 

for longer than 1 second to

 

 

make the indicators appear

 

 

(pg. 22).

28. The indicators and

28. •“ON SCREEN” is set to

28. •Set “ON SCREEN” to “ON”

messages do not appear

“OFF” in the Date/Time

in the Date/Time Menu

on screen.

Menu.

(pg. 25).

 

 

•Press the ON/OFF button

 

 

for longer than 1 second to

 

 

make the indicators appear

 

 

(pg. 22).

29. The indicators do not

29. •You have made the

29. •Press the ON/OFF button

appear on the LCD

indicators disappear.

for longer than 1 second to

monitor or in the

 

make the indicators appear

viewfinder.

 

(pg. 22).

30. Images on the LCD

30. •In places subject to low

30. •Adjust the brightness and

monitor appear dark or

temperature, images become

angle of the LCD monitor

whitish.

dark due to the characteristics

(pg. 22, 23).

 

of the LCD monitor. When

 

 

this happens, the displayed

 

 

colours differ from those that

 

 

are actually recorded. This is

 

 

not a defect of the camcorder.

 

 

•When the LCD monitor's

 

 

fluorescent light reaches the

 

 

end of its service life, images

 

 

on the LCD monitor become

 

 

dark. Consult your nearest JVC

 

 

dealer.

 

31. The rear of the LCD

31. •The light used to illuminate

31. •Close the LCD monitor to

monitor is hot.

the LCD monitor causes it to

turn it off or set the Power

 

become hot.

Dial to “OFF”, and let the

 

 

unit cool down (pg. 19).

32. The indicators and the

32. •This may occur when the

32.

image colour on the LCD

surface or the edge of the

————

monitor are not clear.

LCD monitor is pressed.

 

33. Images on the LCD

33. The speaker volume is too

33. •Turn the speaker volume

monitor are jittery.

great.

down (pg. 51).

34. The LCD monitor and the

34.

34. •Wipe them gently with soft

lens have become dirty

————

cloth. Wiping strongly can

(ex. fingerprints).

 

cause damage.

 

 

 

CONTINUED ON NEXT PAGE

Page 73
Image 73
JVC LYT0216-001B There are disturbances in audio and video, Angle of the LCD monitor, Whitish, On the LCD monitor become