10
EN
Indoor Use
GETTING
STARTED
(Cont.)
When using the camcorder indoors, you can use the AC Power Adapter/Charger instead of a battery.
To AC outlet | Power cord |
|
|
| Connector is |
|
| under the cover |
|
| |
|
| AC Power |
Power lamp |
| Adapter/Charger |
When power is |
| Core |
supplied, the |
| |
| Filter | |
power lamp lights. |
| |
|
| |
| To DC OUT jack | DC cord |
1 SUPPLY POWER TO ADAPTER Plug the AC Power Adapter/Charger’s power cord in to an AC outlet.
2 SUPPLY POWER TO CAMCORDER Connect the AC Power Adapter/Charger to the camcorder.
Using The Power Pack
NOTE:
When using the provided DC cord, make sure you connect the end of the cable with the core filter to the camcorder. The core filter improves perform- ance of equipment.
For extended use, prepare the provided Power Pack, which can be loaded with one battery pack. This Power Pack can be used together with the battery installed in the camcorder.
Connector | Battery cover |
| |
Screw | Knob |
Mark
Battery
Screw head
INSERT CHARGED BATTERY | |
1 Open the battery cover while pressing the | |
knob and insert the | end of the battery |
first. Close the battery cover.
2 ATTACH TO CAMCORDER
Align the connector and screw on the Power Pack while inserting the camcorder connector. Turn the
•To detach the Power Pack, turn the screw counterclockwise.
NOTES:
●When the battery remaining power indicator
appears as 
, that means the battery power is close to nil. When the battery power is exhausted, power turns off automatically.
●Each time you start shooting, the camcorder chooses the battery pack that has more remaining power, and uses that as the power supply. That means both battery packs will be exhausted at roughly the same time.
