JVC RX-5032VSL manual Basic Operations, English, Selecting Different Sources for Picture and Sound

English

Basic Operations

Front panel	Remote control
	MASTER VOLUME	10	TA/NEWS/INFO	10
			0
	DIMMER control			SLEEP
			DISPLAY MODE
RX–5032VAUDIO/VIDEO CONTROL RECEIVER
	Audio source
	selection buttons
	DIMMER			MUTING
				VOLUME +/–
PHONES jack SPEAKERS	Audio source
ON/OFF	selection buttons

Selecting Different Sources for Picture

and Sound

You can watch the picture from a video component while listening to sound from another component.

Press one of the audio source selection buttons while watching the picture from a video component such as the VCR or DVD player.

•Once you have selected a video source, pictures of the selected source are sent to the TV until you select another video source.

Listening with Headphones Only	Remote
	NOT

You must turn off the speakers when you listen with headphones.

1Press SPEAKERS ON/OFF on the front

panel.

“HEADPHONE” appears on the display for a while. The SPK indicator goes off and the H.PHONE indicator lights up.

		TAPE/CDR	CD	DVD
CD	TAPE/CDR	FM/AM
				ANALOG
		FM/AM	TV SOUND	VCR /DIGITAL
	SOURCE NAME
On the front panel		From the remote control			This cancels the Surround/DSP modes currently selected
					and activates the HEADPHONE mode (see below).

Adjusting the Volume

On the front panel

To increase the volume, turn MASTER VOLUME control clockwise.

To decrease the volume, turn MASTER VOLUME control counterclockwise.

From the remote control

To increase the volume, press VOLUME +.To decrease the volume, press VOLUME –.

The volume level can be adjusted within a range of “0” (minimum) to “50” (maximum).

CAUTION:

Always set the volume to the minimum before starting any source. If the volume is set at a high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.

2Connect a pair of headphones to the PHONES jack on the front panel.

HEADPHONE mode

When using the headphones, the following signals are sent to the headphones regardless of your speaker setting:

–For 2 channel sources, the front left and right channel signals are sent directly to the headphones.

–For multi-channel sources, the front left/right, center, and surround left/right channel signals are down-mixed and then sent to the headphones.

You can enjoy multi-channel sound sources using the headphones.

Note:

While in the HEADPHONE mode, you cannot use any Surround/DSP

modes (see pages 22 to 25).

11