JVC RX-5032VSL manual Specifications, English, Amplifier, Audio, Video

English

Specifications Designs & specifications are subject to change without notice.

Amplifier

Output Power:	At Stereo operation:
	Front channels:	100 W* per channel, min. RMS, driven into 8 Ω at 1 kHz with no
		more than 0.9% total harmonic distortion. (IEC268-3/DIN)
	At Surround operation:
	Front channels:	100 W per channel, min. RMS, driven into 8 Ω at 1 kHz with no
		more than 0.8% total harmonic distortion.
	Center channel:	100 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than
		0.8% total harmonic distortion.
	Surround channels:	100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no
		more than 0.8% total harmonic distortion.

	(* Measured on AC 110 V, 127 V, 220 V, and 240 V)
Audio
Audio Input Sensitivity/Impedance (1 kHz):	CD, TAPE/CDR, VCR, TV SOUND, DVD:		220 mV/47 kΩ
Audio Input (DIGITAL IN)* :	Coaxial:	DIGITAL 1 (DVD):	0.5 V (p-p)/75 Ω
	Optical:	DIGITAL 2 (CD):	–21 dBm to –15 dBm (660 nm ±30 nm)
	* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround
	(with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level:	TAPE/CDR, VCR:		220 mV
Signal-to-Noise Ratio (’66 IHF/DIN):	CD, TAPE/CDR, VCR, TV SOUND, DVD:		87 dB/67 dB
Frequency Response (8 Ω):	CD, TAPE/CDR, VCR, TV SOUND, DVD:		20 Hz to 20 kHz (±1 dB)
Tone Control:	Bass (100 Hz):		±10 dB
	Treble (10 kHz):		±10 dB
Video
Video Input Sensitivity/Impedance:
Composite video:	DVD, VCR:		1 V (p-p)/75 Ω
Video Output Level/Impedance:
Composite video:	VCR, MONITOR OUT:		1 V (p-p)/75 Ω
Synchronization:	Negative
Signal-to-Noise Ratio:	45 dB

33