English
Getting Started
Connecting the AM and FM Antennas
AM antenna connection
Connect the supplied AM loop antenna to the AM LOOP terminals.
Turn the loop until you have the best reception.
•If the reception is poor, connect an outdoor single vinyl- covered wire (not supplied) to the AM EXT terminal. (Keep the AM loop antenna connected.)
FM antenna connection
Connect the supplied FM antenna to the FM 75 Ω COAXIAL terminal as a temporary measure.
Extend the supplied FM antenna horizontally.
•If the reception is poor, connect an outdoor FM antenna (not supplied). Before attaching a 75 Ω coaxial cable with a connector, disconnect the supplied FM antenna.
7How to connect the AM antenna cord
123
Rear panel
•If FM reception is poor, connect an outdoor FM antenna.
75 FMCOAXIAL
75 Ω coaxial cable with a | FM |
| 75 |
connector (not supplied) | COAXIAL |
| |
ANTENNA | FM antenna (supplied) |
| |
FM 75 |
|
COAXIAL |
|
Extend the supplied FM antenna horizontally.
1Open the terminal.
2Insert the AM antenna cord.
3Close the terminal.
Notes:
• If the AM loop antenna wire is covered with vinyl, remove the vinyl by twisting it as shown to the right.
•Make sure the antenna conductors do not touch any other terminals, connecting cords, or power cord. This could cause poor reception.
AM
LOOP
AM loop antenna
(supplied)
AM
EXT
If AM reception is poor, connect outdoor single
Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.
5
