JVC RX-5032VSL manual Sound Adjustments Using Remote Control, Press Sound

7Tone—BASS, TREBLE

Adjust the bass and treble sounds as you like (–10 dB to +10 dB in 2 step intervals).

• “0” is the initial setting.

7Subwoofer output level—SUBWFR (Subwoofer) LEVEL

Adjust the subwoofer output level (–10 dB to +10 dB in 1 step intervals).

• “0” is the initial setting.

Note:

Subwoofer output level cannot be adjusted in the following cases:

•When “SUBWOOFER NO” is selected for the subwoofer setting (see page 13).

•When the HEADPHONE mode is in use (see page 11).

7Speakers’ output level

Adjust the speakers’ output level so that you can hear sounds from each speaker at an equal level (–10 dB to +10 dB in 1 step intervals).

• “0” is the initial setting for all speakers.

FRONT L LEVEL Left front speaker output level

FRONT R LEVEL Right front speaker output level

CENTER LEVEL* Center speaker output level

SURR L LEVEL* Left surround speaker output level

SURR R LEVEL* Right surround speaker output level

7Panorama control for Pro Logic II Music— PANORAMA CTRL (Control)

You can turn on or off the Panorama control for Pro Logic II Music only when “PL II MUSIC” is activated.

Select “PANORAMA ON” to enjoy “wraparound” sound effect with side-wall image (“OFF” is the initial setting).

• For Pro Logic II Music, see page 22.

Sound Adjustments Using Remote

Control

You can also use the remote control to adjust the speaker output levels and the subwoofer output level.

•You can use the test tone to make your favourite adjustments (except for subwoofer level adjustment).

A/V CONTROL

		RECEIVER
	TEST	FRONT L FRONT R
TEST	1	2	3	FRONT R
FRONT L		CENTER	SUBWFR	SUBWFR
CENTER	4	5	6
		SURR L	SURR R
SURR L	7/P	8	9	SURR R

LEVEL

10	0	10
		100

English

*You can adjust these items depending on the current speaker settings (see page 13) and Surround/DSP mode (see “Adjustable items and selected Surround/DSP mode” on page 25).

Notes:

SOUND

LEVEL

9/(

•You cannot adjust the center speaker output level when the center speaker size is set to “NONE” (see page 13).

•You cannot adjust the surround speaker output levels when the surround speaker size is set to “NONE” (see page 13).

7Effect level for DAP modes—EFFECT

You can adjust the effect level for DAP modes only when one of the DAP modes is activated (EFFECT 1 to EFFECT 5).

“EFFECT 3” is the initial setting. As the number increases, the effect becomes more stronger.

• For DAP modes, see page 23.

Adjusting Speaker Output Levels Using Test Tone

The center and surround speakers are temporarily activated and you can adjust them when you are listening to stereo sound or one of the DAP modes is activated.

Notes:

•You cannot adjust the center speaker output level when the center speaker size is set to “NONE” (see page 13).

•You cannot adjust the surround speaker output levels when the surround speaker size is set to “NONE” (see page 13).

1Press SOUND.

The 10 keys are activated for sound adjustments.

TO BE CONTINUED TO THE NEXT PAGE

18