Sound Adjustments
Front panel
INPUT ATT
SUBWOOFER
OUT ON/OFF
English
Attenuating the Input Signal | Remote | |
NOT | ||
|
When the input level of the analog source is too high, the sound will be distorted. If this happens, you need to attenuate the input signal level to prevent the distortion.
Once this has been adjusted, this receiver memorizes the adjustment for each source.
Press and hold INPUT ATT on the front panel so that the INPUT ATT indicator lights up on the display.
•Each time you press and hold the button, the Input Attenuator mode turns on (“INPUT ATT ON”) or off (“INPUT NORMAL”).
Turning Off the Subwoofer | Remote |
| NOT |
When the subwoofer is set to “YES” (see page 13), you can choose to turn off subwoofer output.
Press SUBWOOFER OUT ON/OFF on the front panel to turn off the subwoofer.
“SUBWOOFER OFF” appears on the display for a while and the S.WFR indicator goes off.
The subwoofer sound comes out of the front speakers.
To turn on the subwoofer, press the button again.
Notes:
•This button does not work when the subwoofer is set to “NO” (see page 13). In this case, “NO SUBWOOFER” will appear on the display for a while.
•You cannot turn off subwoofer output when the front speaker size is set to “SMALL.”
•When you change the subwoofer setting from “NO” to “YES,” subwoofer output is automatically turned on.
16