Connecting Audio/Video Components
When connecting individual components, refer also to the manuals supplied with them.
Analog connections
If your audio components have digital audio output terminal, connecting them using the digital cords explained in “Digital Connections” (see page 12). By using this terminal, you can get better sound quality.
Audio component connections
Use the cables with RCA pin plugs (not supplied).
•Connect the white plug to the audio left jack, and the red plug to the audio right jack.
If your audio components have a COMPU LINK jack
See also page 37 for detailed information about the connection and the COMPU LINK remote control system.
CAUTION:
If you connect a
Cassette deck
You can connect either a cassette deck or a CD recorder to the TAPE/CDR jacks. When connecting a CD recorder to the TAPE/CDR jacks, see below.
Cassette deck
To audio input 
To audio output
R 
OUT
(REC)
L | TAPE |
| CDR |
| L |
| (PLAY) |
R 
CD player
CD player
To audio output
R 
L | CD |
| IN |
CD recorder
You can connect either a CD recorder or a cassette deck to the TAPE/CDR jacks. When connecting a cassette deck to the TAPE/CDR jacks, see above.
CD recorder
To audio input 
To audio output
R 
OUT
(REC)
L | TAPE |
| CDR |
| L |
| IN |
| (PLAY) |
R 
Note:
When connecting a CD recorder to the TAPE/CDR jacks, change the source name to “CDR,” which will be shown on the display when it is selected as the source. See page 17 for details.
9
