JVC RX-7520VBK 1Press and hold STANDBY/ON DVD 2Press DVD, 4Release STANDBY/ON DVD, Standby/On Dvd

To change the transmittable signals for operating a DVD player

1Press and hold STANDBY/ON DVD.

2Press DVD.

3Enter manufacturer’s codes using buttons 1 – 9, and 0.

4Release STANDBY/ON DVD.

Now, you can use the following buttons on the DVD player.

STANDBY/ON DVD : Turn on or off the DVD player.

After pressing DVD (source selecting button), you can use the following buttons on the DVD player:

3	: Start playback.
7	: Stop playback.
4	: Return to the beginning of the
	current (or previous) chapter.
¢	: Skip to the beginning of the next
	chapter.
8	: Pause playback. To release it, press 3.

Manufacturers’ codes for DVD player

Manufacturer	Codes
JVC	01*
Panasonic	02
Philips	04
Pioneer	03
Sony	05
Toshiba	06
Yamaha	07

*“01” is the initial setting.

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

English

DVD menu operations

After pressing DVD (source selecting button), you can use the following buttons for DVD menu operations:

TEST CENTER

1 2 3

EFFECT REAR L

4 5 6

MENU REARR

7/P 8 9

ENTER SUBWOOFER

10 0 10

RETURN100

MENU	: Display or erase the menu screen.
5/∞/3/2	: Select an item on the menu screen.
ENTER	: Enter a selected item.

5Try to operate your DVD player by pressing

STANDBY/ON DVD.

When your DVD player turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of DVD

player, try each one until the correct one is entered.

39