Adjusting the picture quality (VFP)
You can adjust the picture mode.
1
2Select the desired preset, then finish the setting.
Select | Finish |
| |
|
|
NORMAL | Normally select this. |
CINEMA | Suitable for movies |
USER1/ | You can adjust parameters that affect |
USER2 | picture appearance. (See below.) |
|
|
To adjust the picture tone
1Select “USER1” or “USER2” (see above).
2Select a parameter, then confirm the selection.
Select | Confirm | |
|
| |
GAMMA | Controls the brightness of the | |
neutral color | ||
| ||
BRIGHTNESS | Controls the brightness of the | |
entire picture | ||
| ||
CONTRAST | Controls the contrast | |
SATURATION | Controls the color depth | |
TINT | Controls the tint | |
SHARPNESS | Controls the sharpness | |
|
|
3Adjust the parameter, then confirm the selection.
See page 21 for button locations.
Special playback for DVD Audio
Playing back a bonus group
Some DVD Audio discs have a “bonus group.” To play back a bonus group, you have to enter the specific “key number” (a password).
1Select a bonus group.
The key number entry screen appears.
On the TV | On the display |
2Enter the key number, then confirm the entry.
Confirm Enter the number
When the key number is accepted, playback starts and the BONUS indicator goes off.
•If playback does not start, enter correct key number again.
To clear the key number entry
Selecting browsable still pictures
While playing back a track linked to browsable still pictures (B.S.P), you can select the still pictures (turn the page).
•If a track is linked to browsable still pictures, they are usually shown automatically during playback.
Select the desired still picture.
SelectConfirm
4Repeat steps 2 and 3 to adjust others.
5
When connecting the TV to the HDMI MONITOR
OUT terminal ( 8), the VFP setting has no effect.
26