JVC SR-9090U Alarm Search/Date and Time Search, Shuttle search reverse and fast-forward playback

7 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK

7-3 Special-Effects Playback

�

SR-9090U

				REC
REC	STOP REC			EJECT OPERATE
	CHECK	OPERATE
		HDR	RESET/	ON SCREEN
			CANCEL
REW REVERSE PAUSE PLAY FF				SHIFT
	TRACKING	V. LOCK TIMER SEARCH DISPLAY LOCK CNT RESET	MENU	TIME MODE
FIELD REV	– +	– +		– S E T +
	FIELD ADV
[REW] button	[FF] button

[PLAY] button

Shuttle search (reverse and fast-forward) playback

Press the [FF] button or [REW] button in the Play mode to engage the Fast-Forward Shuttle Search mode or Reverse Shuttle Search mode.

5 Fast-forward shuttle search	5 Reverse shuttle search
Press the [FF] button during play.	Press the [REW] button during play.
The fast-forward search indicator is shown	The rewind search indicator is shown on the
on the display and the Fast-Forward Shuttle	display and the Reverse Shuttle Search
Search mode is engaged.	mode is engaged.

•The operation varies depending on how the [FF] or [REW] button is pressed. Refer to the table below for details.

7 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK

				9090U
				SR-	�
				REC
REC	STOP REC			EJECT OPERATE
	CHECK	OPERATE
		HDR	RESET/	ON SCREEN
			CANCEL
REW REVERSE PAUSE PLAY FF				SHIFT
	TRACKING	V. LOCK TIMER SEARCH DISPLAY LOCK CNT RESET	MENU	TIME MODE
FIELD REV	– +	– +		– S E T +
	FIELD ADV
		[SET –] button		[SET +] button
[REW] button	[FF] button	[SEARCH] button		[SHIFT f] button

7-4 Alarm Search/Date and Time Search

There are three different ways you can search a tape position.

When the [SEARCH] button is pressed, the Search mode is engaged. Each time the [SEARCH] button is pressed, the Search mode changes.

•(Once) alarm search: To search the start of an alarm recording.

(Twice) alarm scan: To play back around the start of each alarm recording for several seconds.

(Three times) date/time search: To search for a recording made at a specified date and time. Press the [SEARCH] button four times to cancel the Search mode.

Note on date/time search

Recording duration is especially important with timelapse recordings. If the duration is too short, date/time search will not function correctly. The recording duration must be equivalent to at least 5 seconds at Standard (2H) or EP (6H) speed.

(Example) In the 960-hour normal timelapse mode, the recording time should be 40 minutes or more.

Type of
recording	Tape recorded in the 2H (SP) mode or
Operation of		Tape recorded in the 6H (EP) mode or
the [REW] and [FF]	the ordinary Timelapse mode	the HDR Timelapse mode
buttons
Press the button once.	7 times 2H (SP) speed (latch).	21 times the 6H (EP) speed (latch).
	Press the [PLAY] button to restore the	Press the [PLAY] button to restore the
	normal play mode	normal play mode.
Hold the button pressed	7 times 2H (SP) speed.	13 times the 6H (EP) speed.
for more than 2 seconds.	Release the button to restore the normal	Release the button to restore the normal
	play mode.	play mode.

• Latch: Even if the button is released, shuttle search continues.

* During shuttle search, no sound is output.

Alarm search setting screen

ALARM : SRH * 0 1 * * * * * * * * * * * *

0 0 H 0 0M0 1 S * * FR I * * * * * * * * * *

AL – 0 5 6 * BL P L – 0 4 * AUTO * * * * *

* ZOControlOMONUMor. *reel* * * counter* M. * * * * * * *

* MACR * * T E L E * * * * A . * * * * * * *

* DAT EEHEURE * * * * * * * * * * * * *

* DURE * * BANDE * * * T 4 5 * * * * * *

* * * * * * * * * * * * * * * * * * * * * * * *

* * * * * * * * * * * * * * * * * * * * * * * *

* * * * * * * * * * * * * * * * * * * * * * * *

* * * * * * * * * * * * * * * * * * * * * * * *

* 4F I N DE * MENU * * * * * * * * * * *

VCR’s display

Alarm number (01- 99)

To specify the alarm recording to be cued, enter the alarm number with respect to the current tape position in the forward or reverse direction.

Alarm search

A specified alarm recording is searched and the Stop mode is1engaged.

Press the [SEARCH] button once in the Stop mode.

[The VCR enters the Alarm Search mode and the alarm search setting screen is shown on the monitor. The [AL01] indication blinks in the record/playback

speed mode indication section on the display.

*To cancel the Alarm Search mode, press the

2[SEARCH] button three times.

Specify the alarm recording you want to search.

Press the [SET +] or [SET –] button to specify an alarm number from 01 to 99.

The specified alarm number is shown on the monitor and the VCR’s display. The alarm number is not

Alarm number

3absolute; it depends on the current tape position.

Press the [FF] or [REW] button.

[The VCR fast forwards or rewinds.

When the start of the alarm recording with the specified alarm number is located, search stops and the Stop mode is engaged.

The Alarm Search mode is automatically canceled.

48 49