JVC SR-9090U Appendixes, Tape Reel Counter/Tape Remaining Time Table, Rear Panel’s Inputs/Outputs

10 APPENDIXES

10-1 Tape Reel Counter/Tape Remaining Time Table

The table below shows the tape remaining time with the tape reel counter value in each record/playback speed mode (when a T-120 tape is used).

Since actual tape remaining time may differ from the values in the table below, use these values for reference only.

When a T-120 tape is used: Tape remaining time when the tape reel counter is “0000” at the beginning of the tape.

			Record/playback speed modes
	HDR OFF	2H	6H	24H	48H	72H	120H
	HDR ON	2H	6H	24H	48H	72H	120H
	0	2 h 2 m	6 h 8 m	24 h 35 m	49 h 10 m	73 h 45 m	122 h 56 m
	500	1 h 47 m	5 h 22 m	21 h 29 m	42 h 58 m	64 h 27 m	107 h 25 m
	1,000	1 h 32 m	4 h 38 m	18 h 34 m	37 h 8 m	55 h 42 m	92 h 51 m
	1,500	1 h 19 m	3 h 57 m	15 h 50 m	31 h 40 m	47 h 31 m	79 h 12 m
counter	2.000	1 h 6 m	3 h 19 m	13 h 17 m	26 h 35 m	39 h 53 m	66 h 29 m
	2,500	54 m	2 h 44 m	10 h 56 m	21 h 53 m	32 h 49 m	54 h 42 m
reel	3,000	43 m	2 h 11 m	8 h 46 m	17 h 32 m	26 h 18 m	43 h 51 m
	3,500	33 m	1 h 41 m	6 h 47 m	13 h 34 m	20 h 21 m	33 h 56 m
Tape
	4,000	24 m	1 h 14 m	4 h 59 m	9 h 59 m	14 h 58 m	24 h 57 m
	4,500	16 m	50 m	3 h 22 m	6 h 45 m	10 h 8 m	16 h 54 m
	5,000	9 m	29 m	1 h 57 m	3 h 54 m	5 h 52 m	9 h 47 m
	5,500	3 m	10 m	43 m	1 h 26 m	2 h 9 m	3 h 35 m
	5,832	0 m	0 m	0 m	0 m	0 m	0 m

		Record/playback speed modes
	HDR OFF	168H	240H	480H	960H
	HDR ON	168H	240H	480H	960H
	0	172 h 6 m	245 h 52 m	491 h 45 m	983 h 30 m
	500	150 h 23 m	214 h 51 m	429 h 42 m	859 h 25 m
	1,000	129 h 59 m	185 h 42 m	371 h 24 m	742 h 48 m
	1,500	110 h 53 m	158 h 24 m	316 h 49 m	633 h 38 m
counter	2.000	93 h 5 m	132 h 58 m	265 h 57 m	531 h 55 m
	2,500	76 h 35 m	109 h 25 m	218 h 50 m	437 h 40 m
	3,000	61 h 24 m	87 h 43 m	175 h 26 m	350 h 53 m
reel
	3,500	47 h 31 m	67 h 53 m	135 h 46 m	271 h 32 m
Tape
	4,000	34 h 56 m	49 h 55 m	99 h 50 m	199 h 40 m
	4,500	23 h 40 m	33 h 48 m	67 h 37 m	135 h 14 m
	5,000	13 h 41 m	19 h 34 m	39 h 8 m	78 h 17 m
	5,500	5 h 2 m	7 h 11 m	14 h 23 m	28 h 46 m
	5,832	0 m	0 m	0 m	0 m

• When the cassette tape is ejected, the tape reel counter is reset to “0000”.

• When the tape is rewound to the beginning in the Repeat Recording or Auto Rewind mode using the counter end output function, the tape reel counter is reset to “0000”.

Counter end output function: Set the menu switch <CNT TAPE END> to any position except “OFF”.

10 APPENDIXES

10-2 Rear Panel’s Inputs/Outputs

Terminals

Signal levels

Remarks

CAM SW OUT

During

(Timelapse recording)

The switching interval

recording

1 field

can be set to “1 field”

Camera switching

During

or “1 frame” with the

Open-collector

<CAMERA SW> in the

signal output

standby

<IN/OUT> setting

output

5m sec

screen.

GND

(With the menu switch

Camera switching signal output

Time

set to “1 field”)

ALARM IN

HV: 5 V

Input at ground

Alarm signal input

LV: 0 V

level

Min. 400 msec.

ALARM RST IN

HV: 5 V ~ 12 V

Input at high

Alarm signal reset

level

input

Min. 400 msec.

ALARM REC OUT

HV:12 V

Output at high

Alarm recording

(output impedance: 4.7 kohms)

level

mode signal output

Alarm

Record mode

TAPE END OUT

Record mode:

Record mode:

repeat recording ON/auto rewind ON

repeat recording OFF/auto rewind OFF

Output at ground

Tape end signal

HV: 12 V

output

LV: 0 V

level

Max. 10 mA

Manual

About 2

Tape end

seconds

operation

WARNING OUT

HV: 12 V

Output at high

Warning signal

(output impedance: 4.7 kohms)

level

output

Warning

Warning reset

CLOCK RESET IN

HV: 5 V

Input at ground

Clock reset input

LV: 0 V

level

About 100 msec.

CLOCK RESET

Output at ground

OUT

level

Clock reset output

LV: 0 V

About 100 msec.

SERIES REC IN

HV: 5 V

Input at ground

Series recording

LV: 0 V

level

signal input

2.5 - 3 sec.

SERIES REC OUT

HV: 5 V

Output at ground

Series recording

LV: 0 V

level

signal output

2.5 - 3 sec.

SERIES REC IN

HV: 5 V

Input at ground

External automatic

level

recording signal input

External recording

Min. 400 msec.

64 65